Bedienungsanleitung Black Decker BDCDS18 (Seite 8 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

709549

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH

(Original instructions)

Assembly

Warning! Before assembly, make sure that the tool is

switched off and the battery is removed.

Fitting sanding mesh (Fig. E)

u Hold the tool with the sanding base facing upwards.

u Place the sanding mesh (7) onto the sanding base, mak-

ing sure that the holes in the sheet line up with the holes

in the base.

Fitting sanding sheets (Fig. F - Optional accessory)

u Detach the two additional diamond-shaped tips (9) from

the sanding sheet (8).

The diamond-shaped tip (9) can be reversed and replaced

when worn.

u When the front part of the tip (9) is worn, detach it from the

sheet, reverse it and press it onto the sanding base again.

u When the whole tip is worn, remove it from the sanding

base and t a new tip.

For optimal dust collection, ensure the correct type of sanding

paper is used.

Finger attachment (Fig. G)

The nger attachment is used for ne detail sanding.

u Remove the screw (11).

u Remove the diamond-shaped tip (10) from the sanding

base.

u Fit the nger attachment (4) onto the sanding base.

u Fit and tighten the screw (11).

u Fit the appropriate sanding sheet onto the nger attach-

ment.

Replacing diamomnd shaped tip (Fig. G1)

u Replace the diamond shaped tip (10).

u Replace and tighten screw (11).

Fitting and removing the dust cassette (Fig. H)

u Slide the dust cassette (2) onto the connector (2a) and

make sure that it is securely located.

u To remove the dust casette, pull it to the rear and away

from the rear end of the tool.

Use

Warning! Let the tool work at its own pace. Do not overload.

Switching on and off

u To switch the tool on, depress the on/off switch (1) at the

forward position I.

u To switch the tool off, depress the on/off switch (1) at the

back position O.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance, switch off and

unplug the tool or remove the battery pack.

u Regularly clean the ventilation slots in your tool using a

soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

Protecting the environment

Separate collection. Products and batteries

marked with this symbol must not be disposed of

with normal household waste.

Products and batteries contain materials that can be recov-

ered or recycled reducing the demand for raw materials.

Please recycle electrical products and batteries according to

local provisions. Further information is available at

www.2helpU.com

Technical data

BDCDS18

Input voltage V

Oscillations (no load) min

-1

12000

Orbits (no load) min

-1

12000

Sanding base surface

8866

Weight kg

0.85

Battery

BL1518

Voltage V

Capacity

1.5

Type 1

Charger SSC-250040X

Input voltage V

230

Output voltage V

8 - 20

Current

400

(sound pressure) 68.2 dB(A), Uncertainty (K) 3 dB(A)

(sound power) 79.2 dB(A), Uncertainty (K) 3 dB(A)

Vibration total values (triax vector sum) according to EN 60745:

Vibration emission value (main handle) (a

) 5.98m/s

, uncertainty (K) 1.5 m/s

Vibration emission value (aux. handle) (a

) 7.3m/s

, uncertainty (K) 1.5 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BDCDS18 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info