Bedienungsanleitung Black Decker BDCR18 (Seite 8 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

709546

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

(Original instructions)

u When cutting thin sheet metal, clamp a piece of scrap

wood to the back surface of the workpiece and cut through

this sandwich.

u Spread a lm of oil along the intended line of cut.

Pocket cutting in wood (g. I)

u Measure and mark the required pocket cut.

u Fit a saw blade suitable for pocket cutting.

u Rest the shoe (3) on the workpiece in such a position that

the blade forms an appropriate angle for the pocket cut.

u Switch on the tool and slowly feed the blade into the

workpiece. Make sure that the shoe (3) remains in contact

with the workpiece at all times.

Cutting branches

Branches up to 25 mm in diameter can be cut with this tool.

Warning! Do not use the tool while in a tree, on a ladder or

on any other unstable surface. Be aware of where the branch

will fall.

u Cut downward and away from your body.

u Make the cut close to the main branch or tree body.

Vertical cutting

The tool allows close cutting to corners and other difcult

areas.

u Insert the shank of the saw blade into the blade holder

with the teeth of the blade facing upward.

u Hold the tool with the shoe (3) facing downward so that

you are as close to the work surface as possible.

u Cut forward and away from your body.

Accessories

The performance of your tool depends on the accessory used.

BLACK+DECKER accessories are engineered to high quality

standards and designed to enhance the performance of your

tool. By using these accessories you will get the very best

from your tool.

Blades

The saw will accept a blade up to 30 cm long. Always use the

shortest blade suitable for your project but long enough to

keep the blade cutting through the material. Longer blades are

more likely to be bent or damaged during use. During opera-

tion some longer blades may vibrate or shake if the saw is not

kept in contact with the workpiece.

Maintenance

Your BLACK+DECKER tool has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Your charger does not require any maintenance apart from

regular cleaning.

Warning! Before performing any maintenance on the tool,

remove the battery from the tool. Unplug the charger before

cleaning it.

u Regularly clean the ventilation slots in your tool and

charger using a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

u Regularly open the chuck and tap it to remove any dust

from the interior.

Protecting the environment

Separate collection. Products and batteries

marked with this symbol must not be disposed of

with normal household waste

Products and batteries contain materials that can be recov-

ered or recycled reducing the demand for raw materials.

Please recycle electrical products and batteries accord-

ing to local provisions. Further information is available at

www.2helpU.com

Technical data

BDCR18 (H1)

Input voltage V

No-load speed Min

-1

0-3000

Stroke length mm 22

Weight kg 1.5

Charger 905902**/

N4940**

905998**/

906349**

Input voltage V

100-240 220-240

Output voltage V

8-20 8-20

Current A 400 1000

Approx. charge time Hours 3-11 1.5-5

Battery (where

supplied)

BL2018* BL1518* BL2518* BL4018

Voltage V

18 18 18 18

Capacity Ah 2.0 1.5 2.5 4.0

Type Li-Ion Li-Ion Li-Ion Li-Ion

Level of sound pressure according to EN 60745:

Sound pressure (L

) 79.5 dB(A), uncertainty (K) 3 dB(A)

Sound power (L

) 90.5 dB(A), uncertainty (K) 3 dB(A)

Vibration total values (triax vector sum) according to EN 60745:

Cutting boards (a

h,B

) 17.9 m/s

, uncertainty (K) 1.5 m/s

Cutting wooden beams (a

h, WB

) 19.7 m/s

, uncertainty (K) 1.5 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BDCR18 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info