Bedienungsanleitung Black Decker BEMW481BH (Seite 14 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

709478

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

ENGLISH

(Original instructions)

ENGLISH

(Original instructions)

When sharpening the blade:

u Make sure blade remains balanced.

u Sharpen blade at the original cutting angle.

u Sharpen cutting edges on both ends of blade, removing

equal amounts of material from both ends.

To sharpen blade in a vice (g. V)

u Be sure the blade has stopped and the mower is

unplugged before removing the blade.

u Remove blade from mower. See instructions for removing

and installing blade.

u Secure blade (17) in a vice (21).

u Wear proper eye protection and gloves and be careful not

to cut yourself.

Carefully le the cutting edges of the blade with a ne

tooth le (22) or sharpening stone, maintaining the angle

of the original cutting edge. Check balance of blade. See

instructions for blade balancing.

u Replace blade on mower and tighten securely.

Blade balancing (g. W)

Check balance of the blade (17) by placing centre hole in

the blade over a nail or round shank screwdriver, clamped

horizontally in a vice. If either end of the blade rotates

downward, le along the sharp edge of that dropping end.

Blade is properly balanced when neither end drops.

Lubrication

No lubrication is necessary. Do not oil the wheels. They have

plastic bearing surfaces which require no lubrication.

Cleaning

Turn the mower off and let the blade come to a stop. Use only

mild soap and a damp cloth to clean the mower. Clean out any

clippings which may have accumulated on the underside of

the deck. After several uses, check all exposed fasteners for

tightness.

Preventing corrosion

Fertilizers and other garden chemicals contain agents which

greatly accelerate the corrosion of metals.

If you mow in areas where fertilizers or chemicals have been

used, the mower should be cleaned immediately afterward as

follows:

Turn the mower off and unplug mower. Wipe all exposed parts

with a damp cloth.

Maintenance

Your BLACK+DECKER corded/cordless appliance/tool has

been designed to operate over a long period of time with a

minimum of maintenance. Continuous satisfactory operation

depends upon proper tool/appliance care and regular

cleaning.

Warning! Before performing any maintenance on corded/

cordless power tools:

u Switch off and unplug the appliance/tool.

u Or run the battery down completely if it is integral and then

switch off.

u Unplug the charger before cleaning it. Your charger does

not require any maintenance apart from regular cleaning.

u Regularly clean the ventilation slots in your tool/appliance

and charger using a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

u Regularly use a blunt scraper to remove grass and dirt

from the underneath of the guard.

Troubleshooting

If your appliance seems not to operate properly, follow the

instructions below. If this does not solve the problem, please

contact your local BLACK+DECKER repair agent.

Warning! Before proceeding, release the bail bar to turn

mower off and wait for the blade to stop.

Problem Possible cause Possible solution

Mower will

not start.

Cord is not

plugged in.

Plug mower into a work-

ing outlet.

Circuit fuse is

blown.

Replace circuit fuse. (If

the product repeatedly

causes the circuit fuse

to blow, discontinue use

immediately and have

itserviced by an author-

ised BLACK+DECKER

service center.

Cord or switch

is damaged.

Have cord or switch

replaced at an author-

ised BLACK+DECKER

service center.

Grass too long. Increase the height of

cut and move machine

to shorter grass to start.

Machine func-

tions intermit-

tently.

Thermal cut out

activated.

Allow motor to cool and

increase height of cut.

Machine

leaves ragged

nish or mo-

tor labours.

Height of cut

too low.

Increase height of cut.

Cutting blade

blunt.

Replace the blade.

Underside

of machine

clogged.

Check underneath the

machine and clear out

as necessary (always

wear heavy duty gloves)

Blade tted

upside down.

Ret blade correctly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BEMW481BH Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info