Bedienungsanleitung Black Decker BES610 (Seite 6 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

709475

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH

(Original instructions)

ENGLISH

(Original instructions)

accordance with a standard test method provided by EN62841

and may be used for comparing one tool with another.

The declared vibration emission value may also be used in a

preliminary assessment of exposure.

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

Labels on tool

The following pictograms along with the date code are shown

on the tool:

Warning! To reduce the risk of injury, the user

must read the instruction manual.

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised BLACK+DECKER Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features:

1. On/off switch

2. Lock-on button

3. Saw blade locking lever

4. Shoe plate

5. Dust extraction outlet

6. Pendulum stroke dial

7. Variable speed dial

7a. LED work light

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting and removing the saw blade (g. A)

u Hold the saw blade (8) with the teeth facing forward as

shown.

u Push the locking lever (3) away from the shoe plate (4).

u Insert the shank of the blade fully into the blade clamp (9)

as far as it will go.

u Release the lever.

u To remove the saw blade (8), Push the locking lever (3)

away from the shoe plate (4) and pull the blade out.

Connecting a vacuum cleaner to the tool (g. B)

u Slide the vacuum nozzle into the dust extraction outlet (5).

Use

Adjusting the shoe plate for bevel cuts (g. C, D)

Warning! Never use the tool when the saw shoe plate is loose

or removed.

The shoe plate (4) can be set to a left or right bevel angle of

45°.

u Loosen the screw (10).

u Rotate the shoe to the left or right to the 45° location.

u Tighten the screw.

To reset the shoe plate (4) for 90° cuts:

u Loosen the screw (10).

u Rotate to the centre and push it back into the 0° location.

u Tighten the screw.

Switching on and off (g. G)

u To switch the tool on, press the on/off switch (1).

u The LED work light (7a) will actuate.

u For continuous operation, press the on/off switch (1) and

then press the lock-on button (2).

u To switch the tool off, release the on/off switch.

To switch the tool off, when in continuous operation press

the on/off switch once more and release it.

Variable speed control

Set the jigsaw speed by rotating the variable speed control

wheel (7) to the appropriate speed. Rotating the variable

speed control wheel toward the rear of the jigsaw will result

in slower speeds. Position the speed control dial at “1” for the

slowest speed, “3” for medium speed and at “7” for the highest

speed.

How to use the sightline feature (g. E)

u Use a pencil to mark the cutting line.

u Position the jigsaw over the line (11).

Viewing from directly above the jigsaw, the line of cut can be

followed easily.

Cutting mode

Pendulum stroke or action provides a more aggressive blade

motion and is designed for cutting soft materials such as wood

or plastic. It provides a faster cut, but with a less smooth cut

across the material. Your jigsaw has a Pendulum Stroke dial

to set the pendulum action. Use of this dial is explained in the

next two sections.

Note: Never use pendulum action to cut metal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BES610 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info