Bedienungsanleitung Black Decker BHFEV36B2D (Seite 9 von 12) (Englisch)

792731

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

ENGLISH

(Original instructions)

Removing lter (Fig. L)

uLift and remove the lift away dust canister (6) from the

chassis (17) as shown in gure I.

uPlace the dust canister over a trash bin and press the

dust canister lid release button (6a) to empty the dust

canister as shown in gure J.

uGrasp the agitator wheel housing (21) and pull up

to remove.

uRemove the lter (22), from the agitator wheel housing

(21) as shown in gure L.

uShake off or lightly brush any loose dust from the lter.

uInstall the the lter (22), into the agitator wheel

housing (21).

uInstall the agitator wheel housing (21) onto the dust

canister, until it “clicks” rmly into position.

Cleaning the lters

uOnce the lter and pre-lter are removed from the dust

canister shake off or lightly brush any loose dust from

the pre-lter and lter.

uRinse out the dust canister (6) with warm soapy water.

uWash the lters with warm soapy water.

uEnsure the lters are completely dry before retting

(24hrs).

uFollow instructions in the “Removing pre-lter and

Removing lter” sections for assembly instructions.

Note: Maximum dust collection will only be obtained with

clean lters and an empty dust canister.

If dust begins to fall back out of the product after it is

switched off, this indicates that the dust canister is full

and requires emptying or that there is a blockage somewhere.

uWash the lters regularly using warm, soapy water and

ensure that they are completely dry before using again.

The cleaner the lter is, the better the product will perform.

uIt is very important that the lters are completely dry

and correctly in position before use.

Removing and clearing the rotary brushes

(Fig. M)

Warning! To reduce the risk of injury from moving parts,

disconnect battery before cleaning or servicing.

uTo remove the rotary brush (23) from the oor head (8)

depress the release button (24) as shown in gure M.

uLift the rotary brush from its locked position.

uThe rotary brush (23) can now be removed.

uClean the rotary brush, and reinstall. Ensure it is secured

in its locked position before operating.

Storage

The unit can be safely stored using the wall storage bracket

(5a) available through your service department.

as shown in gure N.

Maintenance

Your BLACK+DECKER cordless appliance has been designed

to operate over a long period of time with a minimum of main-

tenance. Continuous satisfactory operation depends upon

proper tool care and regular cleaning.

Warning! Before performing any maintenance on cordless

appliances:

uRemove the battery.

uUnplug the charger before cleaning it. Your charger does

not require any maintenance apart from regular cleaning.

uRegularly clean the ventilation slots in your appliance/

charger using a soft brush or dry cloth.

uRegularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

Replacing the filters

The lters should be replaced every 6 to 9 months and when-

ever worn or damaged. Replacement lters are available from

your BLACK+DECKER dealer.

uRemove the old lters as described above.

uFit the new lters as described above.

Trouble shooting

Problem Possible Cause Possible solution

Unit will not

start.

Battery pack not

charged.

Check battery pack charging

requirements.

Blockage.

Check oorhead tube.

Check extension tube.

Check between extension

tube and bowl

Beater bar stops

working. Obstruction.

The unit is equipped with

a beater bar overload protec-

tion feature. Remove and

clean the beater bar of all

debris and obstructions

Battery pack will

not charge.

Charger not plugged in.

Plug charger into a working

outlet. Refer to Important

Charging Notes for more

details.

Surrounding air

temperature too hot or

too cold

Move charger and battery

pack to a

4 °C or below +40 °C.

Protecting the environment

ZSeparate collection. Products and batteries

marked with this symbol must not be disposed of

with normal household waste.

Products and batteries contain materials that can be recov-

ered or recycled reducing the demand for raw materials.

Please recycle electrical products and batteries according to

local provisions. Further information is available at

www.2helpU.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BHFEV36B2D Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info