Bedienungsanleitung Black Decker CD301 T1 (Seite 3 von 44) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

580864

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Intended use

Your Black & Decker jigsaw has been designed for sawing

wood, plastics, ceramics and sheet metal.

This tool is intended for consumer use only.

Safety instructions

◆ Warning! When using mains-powered tools, basic safety

precautions, including the following, should always be

followed to reduce the risk of fire, electric shock, personal

injury and material damage.

◆ Read all of this manual carefully before operating the tool.

◆ Retain this manual for future reference.

◆ Remove the plug from the socket before carrying out any

adjustment, servicing or maintenance.

Keep work area clean

Cluttered areas and benches can cause accidents.

Consider work area environment

Do not expose the tool to rain. Do not use the tool in damp or

wet conditions. Keep the work area well lit. Do not use the

tool where there is a risk of causing fire or explosion, e.g. in

the presence of flammable liquids and gases.

Keep children away

Do not allow children, visitors or animals to come near the

work area or to touch the tool or mains cable.

Dress properly

Do not wear loose clothing or jewellery, as these can be

caught in moving parts. Preferably wear rubber gloves and

non-slip footwear when working outdoors. Wear protective

hair covering to keep long hair out of the way.

Personal protection

Always use safety glasses. Use a face or dust mask whenever

the operations may produce dust or flying particles.

Hearing protection should be worn.

Guard against electric shock

Prevent body contact with earthed or grounded surfaces

(e.g. pipes, radiators, cookers and refrigerators). Electric safety

can be further improved by using a high-sensitivity (30 mA / 30 mS)

residual current device (RCD).

Do not overreach

Keep proper footing and balance at all times.

Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

Secure workpiece

Use clamps or a vice to hold the workpiece. It is safer and it

frees both hands to operate the tool.

Connect dust extraction equipment

If devices are provided for the connection of dust extraction

and collection facilities, ensure that these are connected and

properly used.

Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches are removed

from the tool before operating the tool.

Extension cables

Before use, inspect the extension cable and replace if damaged.

When using the tool outdoors, only use extension cables

intended for outdoor use. Up to 30 m of Black & Decker

extension cable can be used without loss of power.

Use appropriate tool

The intended use is described in this instruction manual.

Do not force small tools or attachments to do the job of a

heavy-duty tool. The tool will do the job better and safer at the

rate for which it was intended. Do not force the tool.

Warning! The use of any accessory or attachment or

performance of any operation with this tool other than those

recommended in this instruction manual may present a risk of

personal injury.

Check for damaged parts

Before use, carefully check the tool and mains cable for damage.

Check for misalignment and seizure of moving parts, breakage

of parts, damage to guards and switches and any other

conditions that may affect its operation. Ensure that the tool

will operate properly and perform its intended function. Do not

use the tool if any part is damaged or defective. Do not use

the tool if the switch does not turn it on and off. Have any

damaged or defective parts repaired or replaced by an

authorised repair agent. Never attempt any repairs yourself.

Unplug the tool

Unplug the tool when it is not in use, before changing any parts

of the tool, accessories or attachments and before servicing.

Avoid unintentional starting

Do not carry the tool with a finger on the on/off switch.

Be sure that the tool is switched off when plugging in.

Do not abuse cord

Never carry the tool by its cord or pull it to disconnect from the

socket. Keep the cord away from heat, oil and sharp edges.

Store idle tools

When not in use, tools should be stored in a dry, locked up or

high place, out of reach of children.

Maintain tools with care

Keep cutting tools sharp and clean for better and safer

performance. Follow the instructions for maintenance and

changing accessories. Keep handles and switches dry, clean

and free from oil and grease.

Repairs

This tool complies with relevant safety requirements.

Repairs should only be carried out by qualified persons using

original spare parts; otherwise this may result in considerable

danger to the user.

ENGLISH

AST7EUR.PM65 19-04-2002, 12:333

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker CD301 T1 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker CD301 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info