Bedienungsanleitung Black Decker CLM3820 T1 (Seite 16 von 164) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

586103

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

ENGLISH

(Original instructions)

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have reached

the end of their working life. To take advantage of this service

please return your product to any authorised repair agent who

will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker ofce at

the address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of our

after-sales service and contacts are available on the Internet

at: www.2helpU.com

Batteries

At the end of their useful life, discard batteries with

due care for our environment:

u Run the battery down completely, then remove it from the

tool.

u NiCd, NiMH and Li-Ion batteries are recyclable. Place

the battery(s) in a suitable packaging to ensure that the

terminals cannot be short-circuited. Take them to any

authorised repair agent or a local recycling station.

u Do not short-circuit the battery terminals.

u Do not dispose of the battery(s) in a re as this may result

in a risk of personal injury or an Explosion.

Technical data

CLM3820

H 1

Input Voltage

No-Load Speed

min

-1

3500

Weight

16.2

Battery BL2036

Voltage

Capacity Ah 2

Type

Li-Ion

Charger LCS36 typ. 1

Input Voltage

230

Output Voltage

Current mA 1300

Approx. charge

time

h 1.5-2.0

Hand/arm weighted vibration value:

= < 2.5 m/s

, uncertainty (K) = 1.5 m/s

(sound preasure) 80 dB(A)

uncertainty (K) = 3 dB(A)

Area of cut:

u This mower can cut up to 300m

on a single 2Ah battery

pack.

u This area (300m

) is achieved on a single, fully charged,

2Ah battery pack in dry conditions with the height adjust-

ment lever in position 6 following light growth conditions.

u In damp conditions, lower height settings or heavy growth

conditions the area of cut may be less than 300m

EC declaration of conformity

MACHINERY DIRECTIVE

OUTDOOR NOISE DIRECTIVE

CLM3820

Black & Decker declares that these products described under

"technical data" are in compliance with:

2006/42/EC, EN 60335-1, EN 60335-2-77

2000/14/EC, Lawn Mower, L < 50cm, Annex VI,

TÜV SÜD Product Service GmbH, Ridlstraße 65,

80339 München, Germany

Notied Body ID No.: 0123

Level of accoustic power according to 2000/14/EC (Article 12,

Annex III, L ≤ 50 cm):

(measured sound power) 93 dB(A)

uncertainty (K) = 3 dB(A)

(guaranteed sound power) 96 dB(A)

These products also comply with directive 2004/108/EC and

2011/65/EU. For more information, please contact Black &

Decker at the following address or refer to the back of the

manual.

The undersigned is responsible for compilation of the technical

le and makes this declaration on behalf of Black & Decker.

Kevin Hewitt

Vice-President Global Engineering

Black & Decker Europe, 210 Bath Road, Slough,

Berkshire, SL1 3YD

United Kingdom

03/01/2014

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker CLM3820 T1 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker CLM3820 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info