Bedienungsanleitung Black Decker EMax32 (Seite 4 von 98) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

474445

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

ENGLISH

(Original instructions)

Intended use

Your Black & Decker mower has been designed for mowing

grass. This tool is intended for consumer use only.

Warning! Read all of the 'Safety, Maintenance,

Service' manual carefully before operating

this appliance.

Read all of this manual carefully before operating

the appliance.

Features

This appliance includes some or all of the following features.

1. Switch box

2. On/off switch

3. Upper handle

4. Lower handle

5. Cable storage holders

6. EdgeMax

7. Grass collection box

8. Grass ap

9. Carry handles

Assembly

Warning! Before assembly, make sure that the appliance is

switched off and unplugged.

Assembling the grass collection box (g. A & B)

The grass box requires assembly before use and comes in 5

pieces.

u Clip the handle (10) into the lid (11) of the grass box (g.

A). The handle will only t one way round.

u Align the lid (11) onto the base of grass collection box.

Ensure that the 10 guides (12) are aligned (g. B)

Note: Take extra care when aligning the 2 clips at the rear of

the grass collection box.

u Push down on the lid to secure all clips. Begin at the back

and ensure that all clips are securely located.

Fitting the switchbox (g. C)

u Align the plastic pins (13) on the switchbox (1) with the

holes on the handle (14) making sure that the switchbox is

on the top edge of the handle.

u Slide the plastic pins (13) on the switchbox (1) all the way

through the holes in the handle.

u Slide the plastic cover (15) into the thin runners in the

switchbox (1).

u Secure the plastic cover (15) with the 2 screws provided.

Fitting the lower handle (g. D)

u Insert the ends of the lower handles (4) into the cor-

responding holes in the mower.

u Press the handle down as far as it will go.

u Secure the handle using the screws (16).

Assembling the upper handle (g. E)

u Fit the upper handle (3) to the lower handle (4) using the

knobs (17), washers (18) and screws (19) as shown.

Note: The upper handle can be xed in 2 different height

positions.

Securing the motor cable (g. F)

The motor cable has to be xed using the cable restraints.

u Clip the cable to the upper and lower handle using the

restraint clips (20) as shown.

Fitting the grass collection box (g. L)

u Lift the ap (8) and place the grass collection box (7) over

the lugs (21).

Cable restraint (g. H)

u Loop the cable through the cable restraint to prevent the

extension cable from becoming detached during use.

Replacing the blade (g. K)

Warning! Ensure the blade has completely stopped and

disconnect the appliance from the mains.

Warning! Only use the specied replacement blade.

Warning! Use heavy-duty gloves to grip the blade.

To remove the blade:

u Turn the appliance onto its side.

u Using heavy-duty gloves, grip the blade.

u Use a 13mm spanner to loosen and remove the blade bolt

(22) by turning the spanner anti-clockwise (ac).

u Remove the blade (23) and blade bolt (22).

To replace the blade:

u Offer the blade up to bolt shaft and locate the blade bolt

(22) into the bolt shaft.

Note: When tting a blade, the text on the blade must be

facing the user.

u Tighten the blade bolt (22) as rmly as possible by hand.

u Using heavy-duty gloves, grip the blade.

u Use a 13mm spanner to securely tighten the blade bolt

(22) by turning the spanner clockwise (c).

Use

Warning! Let the appliance work at its own pace. Do not

overload.

Adjusting the height of cut (g. I)

Warning! Ensure the blade has completely stopped and

disconnect the appliance from the mains.

The height of cut is adjusted by altering the height of all the

wheels, there are 3 positions to choose from.

u Remove the grass collection box (7).

u Turn the lawnmower upside down.

u Take hold of a wheel (24) and push/pull the axle from its

current location.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker EMax32 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info