Bedienungsanleitung Black Decker EMax32 (Seite 5 von 98) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

474445

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

ENGLISH

(Original instructions)

u Move the wheel (24) up/down into the next available loca-

tion.

Note: Adjust one wheel at a time. Adjust one height position

at a time.

Switching on and off (g. G)

Switching on

u Push in and hold the lock-off button (25).

u Pull the on/off switch (2) towards the handle.

u Release the lock-off button.

Switching off

u Release the on/off switch (2).

Warning: Never attempt to lock a switch in the on position.

Mowing (g. N1 & N2)

We recommend to use your mower as outlined in this section

in order to achieve optimum results and to reduce the risk of

cutting the mains cable.

u Place the bulk of the mains cable on the lawn, close to the

starting point (position 1 in g. N1).

u Switch the appliance on as described above.

u Proceed as shown in g. N1

u Move from position 1 to position 2.

u Turn right and proceed towards position 3.

u Turn left and move towards position 4.

u Repeat the above procedure as required.

Warning: Do not work towards the cable as shown in g. N2.

EdgeMax (g. J1 & J2)

EdgeMax allows you to cut grass right up to the edge of a wall

or fence (g J1).

EdgeMax allows you to accurately cut grass right up to the

edge of your lawn (g J2).

u With the lawnmower parallel with the edge of your lawn.

u Push the lawnmower along the edge of the lawn. Ensure

that the EdgeMax (6) is slightly over the edge of your lawn

(g.J2)

Emptying the grass collection box

u Release the on/off switch (2).

u Remove the grass collection box (7).

u Empty the contents from the the box.

Cable storage (g. M) (EMax32 only)

Warning! The cable holders (5) provide a safe and convenient

way to store the cable (26) when not in use..

u Wrap the cable around the cable holders (5) in a gure of

eight pattern.

Carrying the mower

Warning! Ensure the blade has completely stopped and

disconnect the appliance from the mains.

u The mower can be carried using the convenient carry

handles (9).

Hints for optimum use

u If the grass is longer than approximately 10 cm, make two

cuts to obtain a better nish. First mow at maximum height

of cut, then use a low or medium height of cut.

u In order to achieve optimum results, only mow dry grass.

Troubleshooting

If your appliance seems not to operate properly, follow the

instructions below. If this does not solve the problem, please

contact your local Black & Decker repair agent.

Warning! Before proceeding, remove the plug from the

socket.

Problem Possible Cause Possible solution

Machine fails to

operate

Power turned off Turn power on

Fuse faulty/blown Replace fuse

Grass too long

Increase the height of

cut and move machine

to shorter grass to start

Thermal cut out

activated

Allow motor to cool and

increase height of cut

Machine functions

intermittently

Thermal cut out

activated

Allow motor to cool and

increase height of cut

Machine leaves

ragged nish or

motor labours

Height of cut too low Increase height of cut

Cutting blade blunt Replace the blade

Underside of machine

clogged

Check underneath the

machine and clear out

as necessary (always

wear heavy duty

gloves)

Blade tted upside

down

Ret blade correctly

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker EMax32 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info