Bedienungsanleitung Black Decker FSMH1321JSM (Seite 9 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

709563

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

(Original instructions)

Attaching accessories (Fig H)

u Align the lugs on the steam nozzle (17) with the recesses

on the accessory.

u Press the accessory onto the steam nozzle (17) and twist

anti-clockwise until the accessory clicks into place.

Important! All accessories, apart from the SteaMitt

(25)

which has its own hose and connector (26), must be attached

to the steam hose (16) for use.

Removing the hose and accessories

Warning! The steam hose (16), Steam nozzle (17) and

accessories become hot during use. Allow the unit and all

accessories to cool before attempting to remove.

Removing an accessory

u Twist the accessory clockwise then pull away from the

hose (16).

Removing the hose

u Press the steam hose release button (16a) on the steam

hose (16) and pull away from the hand held steam unit.

SteaMitt

Your BLACK+DECKER

SteaMitt

has been designed for

sanitising and cleaning tiles, work tops, kitchen surfaces and

bathroom surfaces. This appliance is intended for indoor

household use only.

Attaching the SteaMitt

hose to the hand held

steam unit

Warning! Inspect the seal between the connection point on

the hand held steam cleaner (5) and the SteaMitt

hose

(26) before each use. If the seal malfunctions or is damaged,

please contact your nearest authorised repair agent. Do not

use the appliance.

u Press the SteaMitt

hose release button on the SteaMitt

hose (26).

u Connect the SteaMitt

hose (26) to the hand held steam

cleaner (5) and release the SteaMitt

hose release button

making sure it clicks into place.

Important! Ensure that the SteaMitt

hose (26) is securely

connected to the hand held steam cleaner (5).

If steam escapes from the joint, the hose is incorrectly tted.

Switch off, allow the unit to cool then remove and ret the

hose.

Fitting a cleaning pad to the SteaMitt

(Fig. L)

u Fit the cleaning pad (27) to the SteaMitt

(25) by

attaching the 'loop' velcro strips (27a) on the upper side

of the cleaning pad, to the 'hook' velcro pads (25a) on the

underside of the SteaMitt

(4). Press down rmly.

Warning! The SteaMitt

should not be used without tting a

cleaning pad.

Note: The SteaMitt

accommodates 3 types of cleaning pads

of varying thickness. The thinnest can be used for cleaning 3D

forms such as taps etc. The thicker versions can be used for

larger at areas.

Warning! Always use the SteaMitt

as shown in

figure M, with your hand inside the protective glove.

Warning! Never attempt to use the SteaMitt

gripping it externally as shown in figure N.

This will result in scalding.

Warning! Avoid using the SteaMitt

in tight corners

as shown in gure O.

Warning! Should a problem occur during use,

use the quick release tab to quickly remove the

SteaMitt

from your hand as shown in gure P.

Warning! Do not use the SteaMitt

on cold glass,

such as windows as damage may be caused by the

sudden change in temperature.

Warning! Never point or direct the mitt at yourself

or any other person.

Note: Variable steam dial is disconnected when the

SteaMitt

is tted and subsequently the ow of steam is

limited.

Use

Important! This unit will kill 99.9% of bacteria and germs

when used in accordance with the instructions in this manual

and with the micro bre pads tted and a continuous run time

of 90 seconds.

Switching on and off

u To switch the appliance on, press the ON/Off switch (1).

It takes approximately 15 seconds for the steam mop to

heat up.

u To switch the appliance off, press the ON/Off switch (1).

Note: always have your hand inside the SteaMitt

before you

press the steam button.

Caution! Never leave the steam mop in one spot on any

surface for any period of time.

Always place the steam mop with the handle (8) supported in

the upright position when stationary and make sure the steam

mop is turned off when not in use.

Caution! Always empty the steam mop after use.

Note! When rst lled or after running dry, it can take up to 45

seconds for steam to be produced.

Autoselect

Technology (Fig. R)

This steam mop is tted with an Autoselect

dial (2) which

shows various cleaning applications. They are used to select

the correct operating mode for your particular cleaning

operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker FSMH1321JSM Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info