Bedienungsanleitung Black Decker GL337SB (Seite 7 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

527582

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Attaching the tube to the head (fig. A)

◆ Align the rectangular tab of the tube (6) with the location

in the head (14).

◆ Insert the tube into the head and push until it clicks into

place.

Attaching the handle to the tube (fig. B)

◆ Align the square tab of the tube (6) with the location in

the handle (2).

◆ Insert the tube into the handle and push until it clicks into

place.

Fitting the guard (fig. C)

◆ Remove the screw (15) from the head.

◆ Place the guard onto the tool as shown.

◆ Firmly press the guard (9) until it snaps into place.

◆ Secure the guard with the screw.

Warning! Never use the tool unless the guard is properly fitted.

Releasing the cutting line

In transit, the cutting line is taped to the spool housing.

◆ Remove the tape holding the cutting line (11) to the spool

housing (12).

Connecting the tool to the mains (fig. D)

◆ Connect the female plug of a suitable extension cable to

the power inlet (4).

◆ Loop the cable through the cable restraint (3).

◆ Insert the mains plug into a mains outlet.

For wired in cable units: Make sure the cable is looped

through the cable restraint prior to connecting the plug to the

mains outlet.

Warning! The extension cable must be suitable for outdoor use.

Use

Warning! Let the tool work at its own pace. Do not overload.

Setting the tool to trimming or edging mode (fig. E - G)

The tool can be used in trimming mode as shown in fig. F or in

edging mode to trim overhanging grass along lawn edges and

flower beds as shown in fig. G.

Trimming mode (fig. E & F)

For trimming, the trimmer head should be in the position

shown in fig. F. If it is not:

◆ Depress the adjustment button (8).

◆ Rotate the head (14), while releasing the button.

◆ When the head is in position, the button will lock into

place.

Note: The tube will only rotate in one direction.

Edging mode (fig. E & G)

For edging, the trimmer head should be in the position shown

in fig. G. If it is not:

◆ Depress the adjustment button (8).

◆ Rotate the head (14), while releasing the button.

◆ When the head is in position, the button will lock into

place.

Note: The tube will only rotate in one direction.

Switching on and off

◆ To switch the tool on, squeeze the trigger lever (1).

◆ To switch the tool off, release the trigger lever.

Warning! Never attempt to lock the trigger lever in the on

position.

Hints for optimum use

General

◆ In order to achieve optimum cutting results, only cut dry

grass.

Trimming

◆ Hold the tool as shown in fig. F.

◆ Gently swing the trimmer from side to side.

◆ When cutting long grass, work in stages from the top.

Take small cuts.

◆ Keep the tool away from hard objects and delicate plants.

◆ If the tool starts running slowly, reduce the load.

Edging

Optimum cutting results are achieved on edges deeper than 50 mm.

◆ Do not use the tool to create edges. To create edges, use

an edging spade.

◆ Guide the tool as shown in fig. G.

◆ To make a closer cut, slightly tilt the tool.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance, switch off and

unplug the tool.

◆ Regularly clean the ventilation slots in your tool using

a soft brush or dry cloth.

◆ Regularly clean the cutting line and spool using a soft

brush or dry cloth.

◆ Regularly use a blunt scraper to remove grass and dirt

from the underneath of the guard.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GL337SB Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info