Bedienungsanleitung Black Decker GL670P (Seite 10 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

527606

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

Switch off, remove the plug from the

socket and ensure that moving parts have

stopped rotating before leaving the

appliance unattended and before

changing, cleaning or inspecting any parts

of the appliance.

◆ Before using the appliance, check that your

cutting path is free from sticks, stones,

wire and any other objects.

◆ Only use the appliance in the correct position,

with the cutting line near the ground, as shown

in the illustrations. Never switch the appliance

on in any other position.

◆ Switch on the appliance only when hands and

feet are away from the cutting line.

◆ Avoid body contact with the cutting line while

the appliance is running.

◆ Do not work on steep slopes. Be sure of your

footing. Be aware that freshly cut grass is

damp and slippery.

◆ Take care when trimming near borders and

gravel paths or roads, as stones and soil may

be moved by the cutting line.

◆ Do not put the appliance down until the

cutting line has come to a complete standstill.

◆ Use only the appropriate type of

Black & Decker cutting line. Never use metal

cutting line or fishing line.

◆ Take care to avoid injury from the line

trimming blade. Do not touch the blade.

After extending new cutting line, always return

the appliance to its normal operating position

before switching on.

◆ Take care to keep the mains cable away from

the cutting line. Always be aware of the

position of the cable.

ELECTRICAL SAFETY

The appliance has been designed for one voltage

only. Always check that the power supply

corresponds to the voltage on the rating plate.

This appliance is designed for use on AC

(mains) power supplies only. Do not

attempt to use on any other supply.

This appliance is double insulated in

accordance with EN 60335; therefore no

earth wire is required.

◆ Prevent body contact with earthed or

grounded surfaces (e.g. metal railings,

lamp-posts etc.).

◆ Electric safety can be further improved by

using a high-sensitivity (30 mA / 30 mS)

residual current device (RCD).

Mains plug replacement (U.K. & Ireland only)

◆ Should your mains plug need replacing and you

are competent to do this, proceed as instructed

below. If you are in doubt, contact an authorised

repair agent or a qualified electrician.

◆ Disconnect the plug from the supply and

remove the fuse from the plug.

◆ Cut off the plug and dispose of it safely; a plug

with bared copper conductors is dangerous if

engaged in a live socket outlet.

◆ Only fit 13 Amperes BS1363A approved plugs

fitted with the correctly rated fuse (1).

Use 5 Amperes fuses.

◆ The cable wire colours, or a letter, will be marked

at the connection points of most good quality

plugs. Attach the wires to their respective points

in the plug (see above). Brown is for Live (L) (2),

blue is for Neutral (N) (4).

◆ Before replacing the top cover of the mains

plug ensure that the cable restraint (3) is

holding the outer sheath of the cable firmly

and that the leads are correctly fixed at the

terminal screws.

◆ If the plug has a fuse cover, make sure that the

fuse cover is fitted. Do not use the plug if the

fuse cover is missing or damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GL670P Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info