Bedienungsanleitung Black Decker GL670P (Seite 12 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

527606

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

Setting the tool to trimming or edging mode

(fig. D, E & F)

The tool can be used in trimming mode as shown

in fig. D or in edging mode to trim overhanging

grass along lawn edges and flower beds as shown

in fig. E.

Trimming mode (fig. D & F)

For trimming, the trimmer head should be in the

position shown in fig. D. If it is not:

◆ Turn the locking ring (7) counterclockwise.

◆ Rotate the trimmer body counterclockwise

until the trimmer head engages in the

trimming position.

◆ Tighten the locking ring by turning it clockwise.

Edging mode (fig. E & F)

For edging, the trimmer head should be in the

position shown in fig. E. If it is not:

◆ Turn the locking ring (7) counterclockwise.

◆ Rotate the trimmer body clockwise until the

trimmer head engages in the edging position.

◆ Tighten the locking ring by turning it clockwise.

GL670/GL670P - Adjusting the position of the

secondary handle (fig. A & G)

The secondary handle can be adjusted to provide

optimum balance and comfort.

◆ Let the guard (11) rest on the ground.

◆ While keeping the handle button (6) depressed,

move the handle (5) into the desired position.

◆ Release the handle button.

GL660/GL660P/GL670/GL670P -

Adjusting the height of the tool (fig. A & H)

This tool has a telescopic body, allowing you to

set it to a comfortable height.

◆ Let the guard (11) rest on the ground.

◆ Turn the locking ring (7) counterclockwise.

◆ Move the switch handle up or down to the

desired height.

◆ Tighten the locking ring by turning it clockwise.

GL670/GL670P -

Adjusting the trimmer head angle (fig. I)

The adjustable trimmer head angle allows you to

set the optimum trimming angle regardless of

your length.

It also allows you to trim under benches and

shrubs.

◆ Let the guard (11) rest on the ground.

◆ Keeping the pedal (10) depressed with your

foot, move the switch handle up or down as

required.

◆ Release the pedal.

Switching on and off (fig. A)

◆ To switch the tool on, push the on/off switch (1).

◆ To switch the tool off, release the the on/off

switch.

Never attempt to lock a switch in the on

position.

Hints for optimum use

Trimming

◆ Hold the tool as shown in fig. D.

◆ Gently swing the trimmer from side to side as

shown in fig. D.

◆ When cutting long grass, work in stages from

the top. Take small cuts.

◆ Keep the tool away from hard objects and

delicate plants.

◆ If the tool starts running slowly, reduce the load.

Edging

Optimum cutting results are achieved on edges

deeper than 50 mm.

◆ Do not use the tool to create edges. To create

edges, use an edging spade.

◆ Guide the tool as shown in fig. E. Keep the

edge guide against the lawn edge.

◆ To make a closer cut, slightly tilt the tool.

General

◆ In order to achieve optimum cutting results,

only cut dry grass.

GL660P/GL670P - Using the plant protector (fig. J)

The plant protector will help you to protect plants

while trimming along lawn edges.

◆ In trimming mode, set the plant protector to

position A.

◆ In edging mode, set the plant protector to

position B or C.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GL670P Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info