Bedienungsanleitung Black Decker GS1400 (Seite 8 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

527512

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISH

General

1. Consider work area environment

Do not expose the tool to rain. Do not use the

tool in damp or wet conditions. Keep the work

area well lit. Do not use the tool where there is

a risk of causing fire or explosion, i.e. in the

presence of flammable liquids and gases. Keep

the work area free from debris and obstacles.

2. Keep children away

Do not allow children, visitors or animals to

come near the work area or to touch the tool

or mains cable.

3. Dress properly

Do not wear loose clothing or jewellery, as

these can be caught in moving parts.

Preferably wear rubber gloves and non-slip

footwear when working outdoors.

Wear protective hair covering to keep long hair

out of the way.

4. Personal protection

Always use safety glasses. Use a face or dust

mask whenever the operations may produce

dust or flying particles. Wear ear protection

whenever the sound level seems uncomfortable.

5. Guard against electric shock

Prevent body contact with earthed or grounded

surfaces (e.g. metal railings, lamp-posts etc.).

Electric safety can be further improved by using

a high-sensitivity (30 mA/30 mS) residual current

device (RCD).

6. Do not overreach

Keep proper footing and balance at all times.

7. Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

8. Secure workpiece

Where appropriate, use clamps or a vice to

hold the workpiece. It is safer and it frees both

hands to operate the tool.

9. Remove keys and adjusting wrenches

Always check that keys and adjusting wrenches

are removed from the tool before operating

the tool.

10.Extension cables

Before use, inspect the extension cable and

replace if damaged. Only use extension cables

intended for outdoor use.

11.Use appropriate tool

The intended use is described in this instruction

manual. Do not force small tools or attachments

to do the job of a heavy-duty tool. The tool will

do the job better and safer at the rate for which

it was intended. Do not force the tool.

Warning! The use of any accessory or

attachment or performance of any operation

with this tool other than those recommended

in this instruction manual may present a risk of

personal injury.

12.Check for damaged parts

Before use, carefully check the tool and mains

cable for damage. Check for misalignment and

seizure of moving parts, breakage of parts,

damage to guards and switches and any other

conditions that may affect its operation. Ensure

that the tool will operate properly and perform

its intended function. Do not use the tool if any

part is damaged or defective. Do not use the

tool if the switch does not turn it on and off.

Have any damaged or defective parts repaired

or replaced by an authorised repair agent.

Never attempt any repairs yourself. If the supply

cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly

qualified person in order to avoid a hazard.

13.Unplug the tool

Unplug the tool when it is not in use, before

changing any parts of the tool, accessories or

attachments and before servicing.

14.Avoid unintentional starting

Do not carry the tool with a finger on the

on/off switch. Be sure that the tool is switched

off when plugging in.

15.Do not abuse cord

Never carry the tool by its cord or pull it to

disconnect from the socket. Keep the cord

away from heat, oil and sharp edges.

16.Store idle tools

When not in use, tools should be stored in a dry,

locked up or high place, out of reach of children.

17.Maintain tools with care

Keep cutting tools sharp and clean for better

and safer performance. Follow the instructions

for maintenance and changing accessories.

Keep handles and switches dry, clean and free

from oil and grease.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GS1400 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info