Bedienungsanleitung Black Decker GS1400 (Seite 10 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

527512

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISH

◆ The earth wire should be of a length to ensure

that in the event of the cable being pulled

from the plug, the earth wire is the last to

break contact.

◆ Before replacing the top cover of the mains

plug ensure that the cable restraint (3)

is holding the outer sheath of the cable firmly

and that the leads are correctly fixed at the

terminal screws.

◆ If the plug has a fuse cover, make sure that the

fuse cover is fitted. Do not use the plug if the

fuse cover is missing or damaged.

Never use a light socket.

Using an extension cable

Always use an approved 3-core extension cable

suitable for the power input of this tool

(see technical data). The extension cable must be

suitable for outdoor use and marked accordingly.

When using a cable reel, always unwind the cable

completely.

CARTON CONTENTS

The carton contains:

1 Shredder body with chute

3 Legs

3 Leg retaining screws

1 Allen key

1 Instruction manual

◆ Carefully unpack all parts.

OVERVIEW (fig. A)

1. On/off switch

2. Body

3. Chute

4. Rear leg

5. Front legs

6. Leg retaining screw

7. Thumb nut

ASSEMBLY

Before assembly, make sure that the tool

is switched off and unplugged.

Mounting the legs (fig. B, D1 & D2)

◆ Loosen the thumb nut (7) and remove the

chute (3) (fig. D1 & D2).

◆ Turn the shredder upside down and place it on

the floor.

◆ Insert the rear leg (4) into the corresponding

opening in the body (2) as shown. Align the

screw hole (11) with the bottom of the slot (12).

◆ Secure the leg with a retaining screw (6).

◆ Insert both front legs (5) into the

corresponding openings in the body (2) as

shown. Align the screw hole (11) with the

bottom of the slot (12).

◆ Secure each of the legs with a retaining screw (6).

◆ Turn the shredder into the upright position and

refit the chute. Securely tighten the thumb nut.

USE

◆ Let the tool work at its own pace.

Do not overload.

◆ Do not switch the shredder off before it

is completely empty, as it may clog and

be difficult to restart.

◆ Remove soil and stones from plant

roots before shredding.

◆ Firmly hold branches when feeding

them into the shredder.

Switching on and off (fig. C)

◆ To switch the tool on, set the on/off switch (1)

to position I.

◆ To switch the tool off, set the on/off switch to

position O.

Hints for optimum use

◆ Shred dry materials last, as this will help to

clear moist material from the shredder.

◆ Do not allow material to pile up and compost

prior to shredding.

◆ You may feed shreddings into the shredder for

a second time to further reduce their volume.

◆ Refer to the chart at the end of this text.

MAINTENANCE

Your Black & Decker tool has been designed to

operate over a long period of time with a

minimum of maintenance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GS1400 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info