Bedienungsanleitung Black Decker GTC800P (Seite 9 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

665805

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

Do not force. Be sure that the battery is fully seated in the

charger.

u Plug in the charger.

3 hour charger

The battery will be fully charged in approx. 3 hours. It can be

removed at any time or left in the connected charger indenitely.

1 hour charger

Check if the red charging indicator (9) lights up. If the green

end of charge indicator (10) lights up now instead, the battery

is too hot and cannot be charged. If this happens, remove the

battery from the charger, let the battery cool down for approx.

1 hour and re-insert it.

After approx. 1 hour of charging, the red charging indicator will

stop lighting and the green end of charge indicator will light

up. The battery is now fully charged.

u Remove the battery from the charger.

Switchingonandoff(g.E)

For your safety, this tool is equipped with a double switching

system. This system prevents starting the tool inadvertently.

Switching on

u Push the lock-off button (2) backward using your thumb

and at the same time squeeze the on/off switch (1).

u Release the lock-off button (2).

Switching off

u Release the on/off switch (1).

Warning! Never attempt to lock a switch in the on position.

Hintsforoptimumuse(g.F1-F2)

u Start by trimming the top of the hedge. Slightly tilt the tool

(up to 15° relative to the line of cut) so that the blade tips

point slightly towards the hedge (g. F1). This will cause

the blades to cut more effectively. Hold the tool at the

desired angle and move it steadily along the line of cut.

The double-sided blade allows you to cut in either

direction.

u In order to obtain a very straight cut, stretch a piece of

string along the length of the hedge at the desired height.

Use the string as a guideline, cutting just above it.

u In order to obtain at sides, cut upwards with the growth.

Younger stems move outwards when the blade cuts

downwards, causing shallow patches in the hedge (g. F2).

u Take care to avoid any foreign objects. Especially avoid

hard objects such as metal wire and railings, as these

could damage the blades.

u Regularly oil the blades.

Guidelines for trimming (UK & Ireland)

u Trim hedges and shrubs with seasonal leaves (new leaves

every year) in June and October.

u Trim evergreens in April and August.

u Trim conifers and other fast growing shrubs every six

weeks from May until October.

Guidelines for trimming (Australia & New Zealand)

u Trim hedges and shrubs with seasonal leaves (new leaves

every year) in December and March.

u Trim evergreens in September and February.

u Trim conifers and other fast growing shrubs every six

weeks from October until March.

Cleaning, maintenance and storage

Your Black & Decker tool has been designed to operate over a

long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Your charger does not require any maintenance apart from

regular cleaning.

Warning! Before performing any maintenance on the tool,

remove the battery from the tool. Unplug the charger before

cleaning it.

After use and before storage

u After use, carefully clean the blades. After cleaning, apply

a lm of light machine oil to prevent the blades from

rusting.

u Regularly clean the ventilation slots in your tool using

a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

u Make sure all switches are free of debris before and after

use.

Storage

When the tool will not be used for several months, ideally

leave the battery connected to the charger.

Otherwise proceed as follows:

u Fully charge the battery.

u Remove the battery from the tool.

u Store the tool and battery in a secure and dry location.

The storage temperature must always remain in the range

of +5 °C to +40 °C. Place the battery on a level surface.

u Before using the tool after prolonged storage, fully charge

the battery again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GTC800P Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info