Bedienungsanleitung Black Decker GTC800P (Seite 10 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

665805

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

Troubleshooting

If the tool does not operate correctly, check the following.

Fault Possible cause Action

Tool will not start. Battery not installed properly. Check the battery

installation.

Battery discharged. Fit a (fully) charged battery.

Lock-off button not actuated. Observe the starting

procedure.

Pole connections Check the connections.

not properly tightened.

Battery will not charge. Battery not installed properly. Check the battery installation.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand for

raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have reached

the end of their working life. To take advantage of this service

please return your product to any authorised repair agent who

will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker ofce at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of our

after-sales service and contacts are available on the Internet

at: www.2helpU.com

Batteries

Black & Decker batteries can be recharged many

times. At the end of their useful life, discard batteries

with due care for our environment:

u Run the battery down completely, then remove it from the

tool.

u NiCd, NiMH and Li-Ion batteries are recyclable. Take them

to any authorised repair agent or a local recycling station.

Technical data

GTC800 (H1)/GTC800P (H1)/

GTC800NM (H1)

Voltage V

Blade strokes (no load) min

-1

2,400

Blade length cm 43

Blade gap mm 12

Blade brake time s < 1.0

Weight (without battery) kg 3.2

Battery

Voltage V

Capacity Ah 1.5

Weight kg 0.45

Charger 3 hr 1 hr

Input voltage V

230 230

Approx. charging time h 3 1

Weight kg 0.4 1.2

Level of sound pressure, measured according to 2000/14/EC:

(sound pressure) 82 dB(A), Uncertainty (K) 3dB(A)

(sound power) 93 dB(A), Uncertainty (K) 3dB(A)

(guaranteed) 95 dB(A), Uncertainty (K) 3dB(A)

Hand/arm weighted vibration value according

to EN 50144: < 2.5 m/s

Uncertainty (K) 1.5 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GTC800P Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info