Bedienungsanleitung Black Decker ka 270 (Seite 7 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

389404

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISH

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for sanders

◆ Always wear a dust mask whenever sanding.

◆ Thoroughly remove all dust after sanding.

◆ Take special care when sanding paint which is possibly

lead based or when sanding some woods and metal

which may produce toxic dust:

- Wear a dust mask specifically designed for protection

against lead paint dust and fumes and ensure that persons

within or entering the work area are also protected.

- Do not let children or pregnant women enter the work

area.

- Do not eat, drink or smoke in the work area.

- Dispose of dust particles and any other debris safely.

◆ Before using the tool on wooden workpieces, make sure

to fit the dust cassette.

◆ Before using the tool on metal workpieces, make sure to

remove the dust cassette.

◆ Never use the tool without a sanding sheet.

◆ Never use the tool without a sanding base.

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Gel comfort grip (KA270GT(K) only)

3. Dust cassette

4. Large detail sanding base

5. Tip holder

6. Sanding base tip

Fig. A

7. Random orbit sanding base

8. Profile attachment (KA270(GT)K only)

9. Sanding profiles (KA270(GT)K only)

10. Detail finger attachment (KA270(GT)K only)

11. Spare sanding base tip (KA270(GT)K only)

12. Louvre attachment (KA270LDK only)

Assembly

Warning! Before assembly, make sure that the tool is switched

off and unplugged.

Random orbit sanding base

With this sanding base, you can use the tool as a random orbit

sander.

Fitting and removing the sanding base (fig. B)

◆ Place the sanding base (7) onto the spindle (13).

◆ Place the washer (14) onto the spindle.

◆ Insert the Allen screw (15) into the screw hole in the spindle.

◆ Tighten the Allen screw using the Allen key (16) supplied.

◆ To remove the sanding base, remove the Allen screw (15)

and washer (14).

Fitting sanding sheets (fig. C)

◆ Hold the tool with the sanding base (7) facing upwards.

◆ Place the sanding sheet (17) onto the sanding base (7).

The holes in the sheet do not need to line up with the

holes in the base.

Large detail sanding base

With this sanding base, you can use the tool as a detail

sander or an orbital sander.

Fitting and removing the sanding base (fig. D & E)

For detail sanding, the pointed end should face forward as in

fig. D. For sanding large areas, the pointed end should face to

the back as in fig. E.

◆ Place the sanding base (4) onto the spindle (13). Make

sure that the legs of the base locate into the tool.

◆ Place the washer (14) onto the spindle.

◆ Insert the Allen screw (15) into the screw hole in the spindle.

◆ Tighten the Allen screw using the Allen key (16) supplied.

◆ To remove the sanding base, remove the Allen screw (15)

and washer (14).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ka 270 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info