Bedienungsanleitung Black Decker KA150 (Seite 20 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

21667

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

Any pre-1960 building may have been painted in the

past with paint containing lead, and covered by

additional layers of paint. It is important to determine

whether the paint that is being sanded contains lead

before beginning work. This can be done with lead test

kits or by a professional decorator.

If in doubt, we recommend the following precautions

when sanding any paint or MDF.

PERSONAL SAFETY

No children or pregnant women should enter the work

area where the paint sanding is being done until all

cleaning up has been completed.

A dust mask or respirator should be worn by all persons

entering the work area. The filter should be replaced

daily or whenever the wearer has difficulty breathing.

Note: Only those dust masks suitable for working with

lead paint dust and fumes should be used. Ordinary

paint masks do not offer this protection.

No eating, drinking or smoking should be done in the

work area to prevent ingesting paint particles. Workers

should wash and clean up before eating, drinking or

smoking. Articles of food, drink etc., should not be left

in the work area where dust could settle on them.

ENVIRONMENTAL SAFETY

Paint should be removed in such a manner as to

minimise the amount of dust generated

Areas where paint removal is occurring should be

sealed with plastic sheeting.

Sanding should be done in a manner to reduce tracking

of paint dust outside the work area.

CLEANING AND DISPOSAL

All surfaces in the work area should be vacuumed and

thoroughly cleaned daily for the duration of the sanding

project. Vacuum filter bags should be changed

frequently. Items of clothing, dust sheets, toys,

washable furniture and utensils should be washed

thoroughly before being used again.

Save these instructions!

DOUBLE INSULATION

The tool is double insulated. This means that all

the external metal parts are electrically insulated

from the mains power supply. This is done by

placing insulation barriers between the

electrical and mechanical components making

it unnecessary for the tool to be earthed.

Note: Double insulation does not take the place

of normal safety precautions when operating the

tool. The insulation system is for added protection

against injury resulting from a possible electrical

insulation failure within the tool.

ELECTRICAL SAFETY

Be sure the supply is the same as the voltage given on

the rating plate. The tool is fitted with a two-core cable

and plug.

MAINS PLUG REPLACEMENT (UK ONLY)

Should the mains plug need replacing and you are

competent to do this, proceed as instructed below.

If you are in doubt, contact a Black & Decker service

agent or a qualified electrician.

• Disconnect the plug from the power supply.

• Cut off the plug and dispose of safely. A plug with

bared copper conductors is very dangerous if

engaged in a live socket outlet.

• Only fit BS1363A approved plugs fitted with the

correctly rated fuse. Note: Fuses do not give

personal protection against electric shock.

• The cable wire colours, or a letter, will be marked at

the connection point of most good quality plugs.

Attach the wires to their respective points in the plug

(see diagram). Brown is L (live) and blue is N (neutral).

Fit a 5 amp fuse

approved

to BS1362

230 volts AC only

Never use a light

socket

Make sure that the

outer sheath of the

cable is held firmly

by the clamp

Fit a BS1363A

approved

resilient plug

Connect

blue to

N (neutral)

Connect

brown to

L (live)

• Before replacing the top cover of the plug ensure

that the cable restraint is holding the outer sheath of

the cable firmly and that the two leads are correctly

fixed at the terminal screws. If the fuse cover is

missing or damaged do not use the plug.

For replacement of detachable fuse covers,

contact a Black & Decker service agent.

Warning! Never connect live or neutral wires to the

earth pin marked E or .

MAINS PLUG REPLACEMENT

(AUSTRALIA AND NEW ZEALAND ONLY)

Should the mains plug or cordset of the product be

damaged, it must only be replaced by an authorised

KA150K ML p19-33 21-09-2000, 13:5520

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KA150 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info