Bedienungsanleitung Black Decker KA161K (Seite 5 von 56) (Deutsch, Französisch, Italienisch, Portugiesisch, Spanisch)

21695

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Additional safety instructions for sanders

◆ Always wear a dust mask whenever sanding.

◆ Thoroughly remove all dust after sanding.

◆ Before using the tool on wooden workpieces, make sure

to fit dust extraction equipment.

◆ Before using the tool on metal workpieces, make sure to

remove the dust extraction equipment.

◆ Never use the tool without a sanding sheet.

◆ Never use the tool without a sanding base.

◆ Hearing protection should be worn whenever the sound

level seems uncomfortable.

Sanding lead-based paint or MDF

Sanding of lead-based paint is not recommended due to the

difficulty of controlling the contaminated dust. The greatest

danger of lead poisoning is to children and pregnant women.

Any pre-1960 building may in the past have been painted with

paint containing lead. This paint may be covered with additional

layers of paint. Before starting work, it is important to

determine whether the paint to be sanded contains lead.

This can be done using a test kit or by a professional decorator.

Personal protection

◆ Do not let children or pregnant women enter the work area.

◆ Wear a dust mask specifically designed for protection

against lead paint dust and fumes and ensure that persons

within or entering the work area are also protected.

◆ Do not eat, drink or smoke in the work area. Do not store

any food or drink in the work area.

◆ Wash yourself very carefully before eating, drinking or

smoking.

Environment

◆ Remove the paint in such a way that the amount of dust is

minimised.

◆ Seal the work area with plastic sheeting.

◆ Minimise the amount of dust outside the work area.

Cleaning

◆ Thoroughly vacuum and clean all surfaces in the work

area every day.

◆ Regularly change the dustbag and filters of the vacuum

cleaner.

◆ Thoroughly wash any foreign objects exposed to dust

before using them again.

Additional safety instructions for Australia and New

Zealand

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Dust extraction connector

3. Base

4. Tip holder

5. Sanding base tip

6. Finger attachment

7. Profile attachment

8. Screw

9. Sanding profiles

In addition, this tool is supplied with some or all of the

following accessories:

Accessory Recommended application

and use

- Coarse grit sandpaper Fast paint, varnish and rust

removal

- Medium grit sandpaper Paint, varnish and rust removal

- Fine grit sandpaper Surface blending and finishing

- Extra fine grit sandpaper Sanding between coats

- Detail sanding tips Corners and hard to reach places

-1 OT polishing/ Polishing metals, stripping

stripping wool varnish and glass cleaning

- Grey foam pad Applying and removing polish

- Red non-woven pad Heavy scrubbing and rust removal

- Grey abrasive paper Polishing plastics

- Contour attachments Curves and profiles

Assembly

Warning! Make sure that the tool is switched off and unplugged.

Fitting sanding sheets (fig. A & B)

◆ Detach the two diamond-shaped tips (10) from the

sanding sheet (11).

◆ Hold the tool with the sanding base facing upwards.

◆ Place the sanding sheet (11) onto the sanding base,

making sure that the holes in the sheet line up with the

holes in the base.

The diamond-shaped tip (10) can be reversed and replaced

when worn.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KA161K Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KA161K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info