Bedienungsanleitung Black Decker KA161K (Seite 6 von 56) (Deutsch, Französisch, Italienisch, Portugiesisch, Spanisch)

21695

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

◆ When the front part of the tip is worn, detach it from the

sheet, reverse it and press it onto the sanding base again.

◆ When the whole tip is worn, remove it from the sanding

base and fit a new tip.

◆ The polishing foam and pads (14) can be fitted the same

way as the sanding sheets.

Tip of the sanding base (fig. C)

When the sanding base tip (5) or tip holder (4) is worn, it can

be reversed or replaced. Spare parts are available from your

Black & Decker dealer.

◆ Remove the screw (8).

◆ Reverse or replace the worn part.

◆ Fit and tighten the screw.

Finger attachment (fig. D)

The finger attachment is used for fine detail sanding.

◆ Remove the screw (8).

◆ Remove the diamond-shaped tip holder (4) from the

sanding base.

◆ Fit the finger attachment (6) onto the sanding base.

◆ Fit and tighten the screw.

◆ Fit the appropiate sanding sheet (12) onto the finger

attachment.

Profile attachment (KA161K only) (fig. E)

The profile attachment is used for contour sanding.

◆ Remove the screw (8).

◆ Remove the diamond-shaped tip holder (4) from the

sanding base.

◆ Fit the profile attachment (7) onto the sanding base.

◆ Fit and tighten the screw.

Fitting and removing a sanding profile (fig. F1 & F2)

◆ Choose the sanding profile most suitable for your application.

◆ Place one end of the sanding profile (9) into the recess at

the front end of the profile holder (7).

◆ Push the other end of the sanding profile until it clicks

into place.

◆ To remove the sanding profile, push it forward and pull

the rear end out of the profile holder (fig. F2).

Fitting a sanding sheet onto a sanding profile (fig. G)

◆ Align the sanding sheet (13) with the sanding profile (9).

◆ Press the sanding sheet onto the sanding profile, making

sure that the sanding sheet follows the shape of the profile.

Use

Warning! Do not cover the ventilation slots when using the

tool. Hold the tool as shown in fig. H. Make sure that the

sanding base is flat on the workpiece.

Connecting a vacuum cleaner (fig. I)

The tool has an adaptor to connect it to a vacuum cleaner

when sanding wood. To connect the tool to a vacuum cleaner,

proceed as follows:

Warning! Make sure that the tool is switched off and unplugged.

◆ Fit the dust extraction connector (2) onto the adapter at

the back of the tool.

◆ Connect the hose of a suitable vacuum cleaner to the

connector.

Switching on and off (fig. J)

Warning! Before connecting the tool to the power supply,

make sure it is switched off.

◆ To switch the tool on, press the part of the on/off switch (1)

marked ‘I’.

◆ To switch the tool off, press the part of the on/off switch (1)

marked ‘0’.

Accessories

The performance of your tool depends on the accessory used.

Black & Decker and Piranha accessories are engineered to

high quality standards and designed to enhance the performance

of your tool. By using these accessories you will get the very

best from your tool.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

◆ Clear the cooling vents and slots with a clean, dry paint

brush.

◆ Clean the housing with a clean, damp cloth. Do not use

solvents.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be fitted:

◆ Safely dispose of the old plug.

◆ Connect the brown lead to the live terminal in the new plug.

◆ Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good quality

plugs. Recommended fuse: 5 A.

Protecting the environment

Black & Decker provides a facility for recycling

Black & Decker products once they have reached the

end of their working life. This service is provided

free of charge. To take advantage of this service

please return your product to any authorised repair

agent who will collect them on our behalf.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KA161K Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KA161K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info