Bedienungsanleitung Black Decker KA293E T2 (Seite 8 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

578032

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISH

18.Store idle tools

When not in use, tools should be stored in a

dry, locked up or high place, out of reach of

children.

19.Maintain tools with care

Keep cutting tools sharp and clean for better

and safer performance. Follow the instructions

for maintenance and changing accessories.

Keep handles and switches dry, clean and free

from oil and grease.

20.Repairs

This tool complies with relevant safety

requirements. Repairs should only be carried

out by qualified persons using original spare

parts; otherwise this may result in considerable

danger to the user.

Additional safety instructions for sanders

◆ Preferably wear a dust mask whenever

sanding.

◆ Thoroughly remove all dust after sanding.

◆ Take special care when sanding paint which is

possibly lead based or when sanding some

woods and metal which may produce toxic

dust:

- Wear a dust mask specifically designed for

protection against lead paint dust and fumes

and ensure that persons within or entering

the work area are also protected.

- Do not let children or pregnant women enter

the work area.

- Do not eat, drink or smoke in the work area.

- Dispose of dust particles and any other

debris safely.

Before using the tool on wooden

workpieces, preferably fit the dustbag.

Before using the tool on metal

workpieces or workpieces containing

metal, make sure to remove the

dustbag.

Wear gloves when working with metal

workpieces.

Wear safety glasses or goggles when

working with metal workpieces.

Wear ear protection when operating this

tool.

ELECTRICAL SAFETY

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

This tool is double insulated in accordance

with EN 50144; therefore no earth wire is

required.

Mains plug replacement (U.K. & Ireland only)

◆ Should your mains plug need replacing and

you are competent to do this, proceed as

instructed below. If you are in doubt, contact

an authorised repair agent or a qualified

electrician.

◆ Disconnect the plug from the supply and

remove the fuse from the plug.

◆ Cut off the plug and dispose of it safely; a plug

with bared copper conductors is dangerous if

engaged in a live socket outlet.

◆ Only fit 13 Amperes BS1363A approved plugs

fitted with the correctly rated fuse (1).

◆ The cable wire colours, or a letter, will be

marked at the connection points of most good

quality plugs. Attach the wires to their

respective points in the plug (see above).

Brown is for Live (L) (2), blue is for Neutral (N) (4).

◆ Before replacing the top cover of the mains

plug ensure that the cable restraint (3) is

holding the outer sheath of the cable firmly

and that the leads are correctly fixed at the

terminal screws.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KA293E T2 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KA293E T2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info