Bedienungsanleitung Black Decker KC9651 (Seite 28 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

472997

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISH

TECHNICAL DATA

The level of sound pressure of the tool is in accordance

with EEC legislation. It is recommended that you take

appropriate measures for the protection of your hearing

if the sound level seems uncomfortable. This normally

equates to a sound pressure in excess of 85dB (A).

Note: This user manual also covers catalogue numbers

ending with a letter suffix. Refer to your carton for

details of your product.

FEATURES

1. Forward/reverse and lock-off switch

2. Variable speed trigger switch

3. Battery pack

4. 3-5 hour charger

5. 1 hour fast charger

6. Keyless chuck

7. Torque adjustment collar

8. Gear ratio selector

9. Screwdriver bit

The forward/reverse and

lock-off switch controls

the direction of rotation

of the chuck. In the

centre position, it

prevents starting of your

drill when changing

accessories or during

storage.

• The variable speed trigger switch is used to operate

your drill in all modes of operation. It also controls

the speed of your drill.

• The torque adjustment collar sets the torque loading

when screwdriving.

• The gear ratio selector enables the setting of the best

speed for screwdriving, or the best speed for drilling.

• Your drill is supplied with a double function

screwdriver bit. To remove, pull firmly from the recess.

To replace, push firmly until it clicks into place.

VARIABLE SPEED

Your drill has a variable

speed trigger switch.

The more the trigger

switch is depressed, the

higher the speed of your

drill. If your drill has a

gear ratio selector, the

change in speed is controlled continuously using the

trigger switch or in two stages using the gear ratio

selector. The maximum speed achieved using the

trigger switch depends on the gear ratio selector setting.

BRAKE

The brake switch stops the rotation of the chuck in less

than 1 second. This feature is useful when adjusting

the seating of screws, and for driving quickly a large

number of screws.

GEAR RATIO SELECTOR

To change the setting of the gear ratio selector,

proceed as follows:

To select the low speed

setting (screwdriving

and high torque

applications), slide the

selector switch to the

front position. The

number ‘1’ appears.

To select the high speed

setting (drilling and hammer drilling), slide the selector

switch to the rear position. The number ‘2’ appears. If

necessary, when changing the gear ratio, depress the

trigger switch sufficiently to rotate the chuck slowly.

Warning! Do not change gear when the chuck is

rotating at other than low speed.

TORQUE ADJUSTMENT COLLAR

To select non-masonry drilling, rotate the collar until

the drill symbol is in line with the indicator on the top of

your drill housing.

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KC9651 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info