Bedienungsanleitung Black Decker kd 664 re (Seite 21 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

387033

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

from the mains power supply. This is done by

placing insulation barriers between the

electrical and mechanical components making

it unnecessary for the tool to be earthed.

Note: Double insulation does not take the place

of normal safety precautions when operating the

tool. The insulation system is for added protection

against injury resulting from a possible electrical

insulation failure within the tool.

ELECTRICAL SAFETY

Be sure the supply is the same as the voltage given on

the rating plate. The tool is fitted with a two-core cable

and plug.

MAINS PLUG REPLACEMENT (UK ONLY)

Should the mains plug need replacing and you are

competent to do this, proceed as instructed below.

If you are in doubt, contact a Black & Decker service

centre or a qualified electrician.

• Disconnect the plug from the power supply.

• Cut off the plug and dispose of safely. A plug with

bared copper conductors is very dangerous if

engaged in a live socket outlet.

• Only fit BS1363A approved plugs fitted with the

correctly rated fuse.

Note: Fuses do not give personal protection against

electric shock.

• The cable wire colours, or a letter, will be marked at

the connection point of most good quality plugs.

Attach the wires to their respective points in the plug

(see diagram). Brown is L (live) and blue is N (neutral).

Fit a plug

approved

to BS1363A

Connect

blue to

N (neutral)

Make sure that

the outer sheath

of the cable is held

firmly by the clamp

Fit a 5 amp fuse

Connect

brown to

L (live)

240 volts AC

only. Never use

a light socket

• Before replacing the top cover of the plug ensure

that the cable restraint is holding the outer sheath of

the cable firmly and that the two leads are correctly

fixed at the terminal screws. If the fuse cover is

missing or damaged do not use the plug. For

replacement or detachable fuse covers, contact a

Black & Decker service centre.

Warning! Never connect live or neutral wires to the

earth pin marked E or .

MAINS PLUG REPLACEMENT

(AUSTRALIA AND NEW ZEALAND ONLY)

Should the mains plug or cordset of the product be

damaged, it must only be replaced by an authorised

Black & Decker service agent because special

purpose tools are required.

EXTENSION CABLES

Up to 30m (100ft) of Black & Decker 2-core extension

cable (or 3-core extension cordset, in Australia and

New Zealand) can be used without undue loss of power.

Note: An extension cable should not be used unless

absolutely necessary. Use of an improper extension

cable could result in a risk of fire and electric shock.

If an extension cable must be used, make sure it is

properly wired, contains the correct rated fuse as

recommended in its literature and is in good

electrical condition.

UNWANTED TOOLS AND THE ENVIRONMENT

Should you find one day that the tool needs

replacement or is of no further use, think of the

protection of the environment. Black & Decker

service centres will accept old tools and will

dispose of them in an environmentally safe way.

THE BLACK & DECKER GUARANTEE

(UK, AUSTRALIA AND NEW ZEALAND ONLY)

If the Black & Decker product becomes defective due

to faulty materials and workmanship, within 24 months

from the date of purchase, we guarantee to either

replace all defective parts or at our discretion, replace

the unit free of charge provided that:

• The product is returned to us or our authorised

repairers with evidence of date of purchase.

• The product has not been used for trade,

professional or hire purposes.

• The product has not been subjected to misuse

or neglect.

• The product has not sustained any damage through

foreign objects, substances or accidents.

• Repairs have not been attempted by anyone other

than our own service staff or authorised repair

distributors.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker kd 664 re Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info