427189
9
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
9
ENGLISH
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons regularly
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
way the tool is used, including taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to the
trigger time.
Labels on tool
The following pictograms are shown on the tool:
:
Warning! To reduce the risk of injury, the user must
read the instruction manual.
Electrical safety
#
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
u If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
Features
1. On/off switch
2. Lock-off button
3. Handle
4. Variable speed control knob
5. Plunge lock lever
6. Spindle lock button
7. Collet
8. Revolver depth stop
9. Depth stop bar
10. Chip deector
11. Dust extraction adaptor
Assembly
Warning! Before assembly, make sure that the tool is
switched off and unplugged.
Fittingarouterbit(g.A)
u Remove the chip deector (10) by pulling it straight up
from the router base.
Warning! Beware not to bend the chip deector.
u Keep the spindle lock button (6) depressed and rotate the
spindle until the spindle lock fully engages.
u Loosen the collet nut (17) using the spanner provided.
u Insert the shank of the router bit (18) into the collet (7).
Make sure that the shank protrudes at least 3 mm from
the collet as shown.
u Keep the spindle lock button (6) depressed and tighten the
collet nut (17) using the spanner provided.
Fittingtheedgeguide(g.B)
The edge guide (12) helps to guide the tool parallel to an edge.
u Insert the bars (19) into the router base as shown.
u Set the edge guide to the required distance.
u Tighten the xing screws (20).
Fittingthedustextractionadaptor(g.C)
The dust extraction adaptor allows you to connect a vacuum
cleaner to the tool.
u Place the dust extraction adaptor (11) onto the dust
extraction outlet as shown.
u Connect the hose (23) of the vacuum cleaner to the
adaptor (11).
Fittingthetemplateguide(g.D)
u Fit the template guide (13) to the base of the router, with
the ange to the bottom (workpiece) side.
u Insert the two long screws (24) from the bottom side
through the template guide and the holes in the base.
u Place a nut onto each of the screws and securely tighten
the nuts.
Fittingthedistancepiece(g.E)
u Fit the distance piece (14) to the base of the router using
the screws provided.
Fittingthecentringpin(g.F)
u Fit the edge guide to the router as shown in g. B,
but upside down.
u Fit the centring pin (15) to the workpiece side of the edge
guide with the screw (25) provided.
Fittingthecopyfollower(g.G)
u Fit the edge guide to the router as shown in g. B.
u Fit the ‘L' bar (16) to the upper side of the edge guide
using the two screws and nuts provided.
u Adjust the rotating attachment (26) on the ‘L' bar with the
wing knob (27).
Fittingtheadditionaledgeguide(g.H)
The additional guide (21) is designed to allow routing of a thin
piece of wood (e.g. the edge of a door).
u Adjust the edge guide (12) as necessary.
u Loosen the xing screws (28).
u Fit the edge guide (21) to the bars (19) protruding from the
router base.
u Adjust the edge guide so the workpiece becomes clamped
between the two edge guide.
u Tighten the xing screws (28).
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Black Decker kw 1600 eka wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info