Bedienungsanleitung Black Decker KW850 T1 (Seite 13 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

577912

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

◆ The router bit must extend below the flange of

the template guide, to cut the workpiece in the

shape of the template.

Using the distance piece (fig. N)

The distance piece can be used for trimming

wooden or laminate vertical projections.

Using the centring pin (fig. O)

The centring pin can be used to cut out circular

patterns.

◆ Drill a hole for the point of the centring pin in

the centre of the circle to be cut.

◆ Place the router on the workpiece with the

point of the centring pin in the drilled hole.

◆ Adjust the radius of the circle with the bars of

the edge guide.

◆ The router can now be moved over the

workpiece to cut out the circle.

Using the copy follower (fig. P)

The copy follower helps to maintain an equal

cutting distance along the edge of irregularly

shaped workpieces.

◆ Place the router on the workpiece at the

desired distance from the edge to be copied.

◆ Adjust the bars of the edge guide until the

wheel is in contact with the workpiece.

Switching on and off (fig. A)

Switching on

◆ Keep the lock-off button (2) depressed and

press the on/off switch (1).

◆ Release the lock-off button.

Switching off

◆ Release the on/off switch.

Hints for optimum use

◆ When working on outside edges, move the

tool counterclockwise (fig. J). When working on

inside edges, move the tool clockwise.

◆ Use HSS router bits for softwood.

◆ Use TCT router bits for hardwood.

◆ You can use the tool without a guide (fig. K).

This is useful for signwriting and creative work.

Only make shallow cuts.

◆ Refer to the table below for common types of

router bits.

Router bits (fig. L)

Description Application

Straight bit (1) Grooves and rebates

Trimming bit (2) Trimming laminates or

hardwood; accurate profiling

using a template

Rebating bit (3) Rebates on straight or curved

workpieces

V-grooving bit (4) Grooves, engraving and

edge bevelling

Core box bit (5) Fluting, engraving and

decorative edge moulding

Cove bit (6) Decorative edge moulding

Ogee moulding bit (7) Decorative edge moulding

Rounding over bit (8) Rounding over edges

Dovetail bit (9) Dovetail joints

Chamfer bit (10) Chamfer edges

MAINTENANCE

Your Black & Decker tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Before performing any maintenance,

switch off and unplug the tool.

◆ Regularly clean the ventilation slots in your tool

using a soft brush or dry cloth.

◆ Regularly clean the motor housing using a

damp cloth. Do not use any abrasive or

solvent-based cleaner.

PROTECTING THE ENVIRONMENT

Black & Decker provides a facility for

recycling Black & Decker products once

they have reached the end of their

working life. This service is provided free

of charge. To take advantage of this

service please return your product to any

authorised repair agent who will collect

them on our behalf.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KW850 T1 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info