Bedienungsanleitung Black Decker KW850 T1 (Seite 11 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

577912

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

Using an extension cable

Always use an approved extension cable suitable

for the power input of this tool (see technical

data). Before use, inspect the extension cable for

signs of damage, wear and ageing. Replace the

extension cable if damaged or defective.

When using a cable reel, always unwind the cable

completely. Use of an extension cable not suitable

for the power input of the tool or which is damaged

or defective may result in a risk of fire and electric

shock.

PACKAGE CONTENTS

The package contains:

1 Router

3 Collets

1 Spanner

1 Edge guide

1 Dust extraction adaptor

1 Centring pin

1 Copy follower

1 Distance plate

1 Template guide

1 Instruction manual

◆ Carefully unpack all parts.

OVERVIEW (fig. A)

1. On/off switch

2. Lock-off button

3. Variable speed control knob

4. Plunge lock lever

5. Fixing screws for edge guide

6. Collet

7. Spindle lock button

8. Revolver depth stop

9. Depth stop bar

10. Locking screw

11. Depth of cut scale

12. Dust extraction adaptor

ASSEMBLY

Before attempting any of the following

operations, make sure that the tool is

switched off and unplugged and that the

spindle has stopped.

Fitting a router bit (fig. B)

◆ Keep the spindle lock (7) depressed and rotate

the spindle until the spindle lock fully engages.

◆ Loosen the collet nut (13) using the spanner

provided.

◆ Insert the shank of the router bit (14) into the

collet (6). Make sure that the shank protrudes

at least 3 mm from the collet as shown.

◆ Keep the spindle lock (7) depressed and

tighten the collet nut (13) using the spanner

provided.

Fitting the edge guide (fig. C)

The edge guide helps to guide the tool parallel to

an edge.

◆ Insert the bars (15) into the router base as shown.

◆ Set the edge guide to the required distance.

◆ Tighten the fixing screws (5).

Fitting the dust extraction adaptor (fig. D)

The dust extraction adaptor allows you to connect

a vacuum cleaner to the tool.

◆ Place the dust extraction adaptor (12) onto the

base of the tool as shown.

◆ Insert the two screws (16) from the bottom

through the holes in the base and in the dust

extraction adaptor.

◆ Place a nut (17) onto each of the screws and

securely tighten the nuts.

Fitting the template guide (fig. M & D)

◆ Fit the template guide (20) to the base of the

router, with the flange to the bottom

(= workpiece) side.

◆ Insert the two long screws (16) from the

bottom side through the template guide and

the holes in the base.

◆ Place the dust extraction adaptor on top of the

base as shown in fig. D.

◆ Place a nut (17) onto each of the screws and

securely tighten the nuts.

Fitting the distance piece (fig. N)

◆ Fit the distance piece (21) to the base of the

router using the screws provided.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KW850 T1 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info