577926
5
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
5
ENGLISH
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will make sure that the safety of the power tool is
maintained.
Additional safety warnings
Warning! Do not use outdoors, indoor use only.
Warning! This appliance is not intended for use by persons
(including children) with reduced physical, sensory, or
mental capabilities, or lack of experience or knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for
their safety.
Warning! Children should be supervised to ensure that they
do not play with the appliance.
Warning! This appliance must be placed on its stand when
not in use.
Warning! A fire may result if the appliance is not used with
care, therefore be careful when using the appliance in places
where there are combustible materials;
X Do not apply heat to the same place for a long time;
X Do not use in presence of an explosive atmosphere;
X Be aware that heat may be conducted to combustible
materials that are out of sight;
X Place the appliance on its stand after use and allow it to
cool down before storage.
X Do not leave the appliance unattended when it is
switched on.
X Do not obstruct either the air intake slots or the nozzle
outlet as this may cause excessive heat build up
resulting in damage to the appliance.
X Do not direct the hot air flow at other people or animals.
X Do not touch the nozzle as it becomes very hot during
use and remains hot for up to 30 minutes after use.
X Do not place the nozzle against any object during or
immediately after use.
X Do not poke anything down the nozzle as it could give
you an electric shock.
X Do not look down the nozzle while the appliance is
switched on.
X Do not use the appliance as a hairdryer! The air
temperature is far higher than a hairdryer.
X Ensure adequate ventilation during use as toxic fumes
may be produced.
X Do not use the appliance in a damp atmosphere.
X When stripping paint, ensure that the work area is
enclosed. Wear a dust mask specifically designed for
protection against lead paint dust and fumes and ensure
that persons within or entering the work area are also
protected.
X Do not burn paint, as it could cause a fire hazard.
X Do not allow paint to adhere to the nozzle as it could
ignite after some time.
X Switch off the appliance and allow it to cool before fitting
any accessory.
Stripping lead-based paint
X Extreme care should be taken when stripping paint. The
peelings, residue and vapours of paint may contain
lead, which is poisonous. Any pre-1960 building may in
the past have been painted with paint containing lead.
This paint may be covered with additional layers of
paint. Once deposited on surfaces, hand to mouth
contact can result in the ingestion of lead.
X Exposures to even low levels of lead can cause
irreversible brain and nervous system damage. The
greatest danger of lead poisoning is to children and
pregnant women.
X Before starting work, it is important to determine
whether the paint to be stripped contains lead. This can
be done using a test kit or by a professional decorator.
Do not smoke, eat or drink in a work area that could or
may be contaminated by lead. Lead based paints
should only be removed by a professional and should
not be removed using a heat gun.
Warning! Additional safety instructions for heat
guns.
!
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Black Decker KX1693 T1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Black Decker KX1693 T1

Black Decker KX1693 T1 Bedienungsanleitung - Polnisch - 12 seiten

Black Decker KX1693 T1 Bedienungsanleitung - Türkisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info