Bedienungsanleitung Black Decker KX1693 T1 (Seite 6 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

577926

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ENGLISH

Labels

Electrical safety

X If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Extension cables

X A 2 or 3 core cable may be used as the appliance is

double insulated and of class II construction.

X Up to 30m (100 ft) can be used without loss of power.

Features

1. Nozzle

2. Air inlet holes

3. Pivot handle unlock button

4. Heat setting switch (on/off)

5. Hanging hook

6. Stand

7. Heat guard

fig. A

10. Black & Decker nozzle

fig. G - J

12. Fish tail nozzle

13. Glass protection nozzle

14. Spoon reflector nozzle

15. Cone nozzle

16. Manual scraper

Assembly (fig. A and B)

Warning! Before assembly, make sure that the appliance is

switched off and unplugged.

Warning! Make sure that the appliance is switched off and

cool before fitting or removing the accessories.

Your heat gun is supplied with an integrated Black & Decker

scraper.

X Align the slot of the scraper blade (9) with the protrusion

on the blade holder (10) and position under the retaining

screw (8).

Note: Make sure that the hole in the scraper (9) is to the left

of the screw (8) in the blade holder (10).

X Tighten the retaining screw (8).

X Place the blade holder (10) over the nozzle outlet (1).

Make sure that it is aligned; the small bump on the

inside of the blade holder (10) engages with the recess

on the nozzle.

X Tighten the blade holder clamp screw (11).

Your heat gun (KX1693 only) is also supplied with the

following four nozzles. For best results it is recommended

that nozzles are always used.

Fish tail nozzle (12) - Ideal for removing paint or varnish

from large flat surfaces.

Cone nozzle (15) - Concentrates the air stream on a smaller,

more concentrated area.

Spoon reflector nozzle (14) - disperses the air evenly

around the whole object.

Glass protector nozzle (13) - for the protection of glass

during paint stripping.

X Fit the connecting piece of the accessory over the

nozzle (1).

Your appliance is also supplied with a manual scraper for

stripping paint and varnish.

Dual position handle (fig. C)

Your appliance is a highly versatile heat gun with a dual

position handle which can be used comfortably for many

different applications. It is designed to be used in either pistol

grip mode (a) or in-line mode (b).

X To switch between positions hold down the handle

unlock button (3) and rotate the handle 180 degrees.

Use

Operating your heat gun (fig. D)

X To turn the heat gun on, push the heat setting switch (4)

forward to the 1, 2 or 3 position (position 3 is on the

KX1693 only).

Note: The position numbers represent the heat settings

described in the technical data table at the end of the

manual.

X To switch your heat gun off, pull the heat setting switch

(4) back to reveal the off (O) position.

Using the appliance

X Allow the appliance to heat up for a few seconds before

use.

Note: At first use some smoke may emit from the nozzle.

This is normal and will soon decrease.

X Low - use a low temperature setting for drying paint and

varnish, removing stickers, shrinking insulation tubes,

and thawing frozen pipes.

Read all of this manual carefully before using your

appliance.

This product is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KX1693 T1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KX1693 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info