Bedienungsanleitung Black Decker MT3000K T1 (Seite 5 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

578616

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISH

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Additional safety instructions for drill/screwdrivers

◆ Before drilling into walls, floors or ceilings, check for the

location of wiring and pipes.

◆ Avoid touching the tip of a drill bit just after drilling,

as it may be hot.

Additional safety instructions for sanders

◆ Always wear a dust mask whenever sanding.

◆ Thoroughly remove all dust after sanding.

◆ Take special care when sanding paint which is possibly

lead based or when sanding some woods and metal

which may produce toxic dust:

- Wear a dust mask specifically designed for protection

against lead paint dust and fumes and ensure that persons

within or entering the work area are also protected.

- Do not let children or pregnant women enter the work

area.

- Do not eat, drink or smoke in the work area.

- Dispose of dust particles and any other debris safely.

Overview (fig. A)

This tool includes some or all of the following features.

Motor unit

1. On/off switch

2. Lock-on button

3. Head release button

4. Bit storage

Screwdriver head

5. Forward/reverse switch

6. Bit holder

Sander head

7. Sanding base

8. Sanding base tip

9. Dust extraction outlet

Preparation head

10. Mounting shaft

11. Clamp plate

12. Allen key storage

Fig. A

In addition, this tool is supplied with some or all of the

following accessories.

13. Scraper head

14. Blade cover

15. Rigid parallel blade

16. Flexible parallel blade

17. Screw driver bit

18. Drill bits

19. Sanding sheet

20. Abrasive pad

21. Dust extraction adaptor

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting and removing tool heads (fig. B)

The different tool heads can be easily exchanged.

◆ To remove a tool head, depress the head release button

(3) and take the head off the tool.

◆ To fit a tool head, line it up with the tool as shown and

push it onto the tool until it snaps into place.

Fitting and removing a screwdriver bit (fig. C)

◆ Pull the sleeve (22) backward.

◆ Insert the bit shaft into the bit holder (6) as far as it will go.

◆ Release the sleeve to secure the bit.

◆ To remove the bit, pull sleeve backward and pull the bit

out firmly.

This tool is supplied with a screwdriver bit in the bit storage (4).

◆ To remove the screwdriver bit from the bit storage press

the bit down into the bit holder recess (4), then lift the bit

out.

◆ To store the screwdriver bit, firmly push it into the storage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker MT3000K T1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker MT3000K T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info