Bedienungsanleitung Black Decker PS7525 (Seite 6 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

709524

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

(Original instructions)

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualied repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Warning! Additional safety warnings for pole

pruners.

The intended use is described in this instruction manual. Do not use

the tool for purposes not intended; for example do not use the tool to

fell trees. The use of any accessory or attachment or performance of

any operation with this tool other than those recommended in this

instruction manual may present a risk of personal injury.

u Hold power tool by insulated gripping surfaces when

performing an operation where the cutting accessory

may contact hidden wiring or its own cord. Cutting ac-

cessory contacting a "live" wire may make exposed metal

parts of the power tool "live" and could give the operator

an electric shock.

u Wear close tting and protective clothing including a

safety helmet with visor/goggles, ear protectors, non-skid

safety footwear, protective bib trousers and strong leather

gloves.

u Always position yourself out of the path of falling

branches.

u The safe distance between a branch to be felled and

bystanders, buildings and other objects is at least 2 1/2

times the length of the branch. Any bystander, building or

object within this distance is at risk from being struck by

the falling branch.

u Pre-plan a safe exit from falling trees or branches. Ensure

the exit route is clear of obstacles that would prevent or

hinder movement. Remember wet grass and freshly cut

bark is slippery.

u Ensure someone is nearby (but at a safe distance) in case

of an accident.

u Do not use the tool while standing in a tree, on a ladder or

on any other unstable surface.

u Keep proper footing and balance at all times.

u Hold the tool rmly with both hands when the motor is

running.

u Do not let the moving chain contact any object at the tip of

the guide bar.

u Start cutting only with the chain moving at full speed.

u Do not attempt to enter a previous cut. Always make a

fresh cut.

u Watch for shifting branches or other forces that could

close a cut and pinch or fall into the chain.

u Do not attempt to cut a branch when the diameter of the

branch exceeds the cutting length of the tool.

u Keep the saw chain sharp and properly tensioned. Check

the tension at regular intervals.

u Switch the tool off, allow the chain to stop and diconnect

from the mains, before carrying out any adjustment,

servicing or maintenance.

u Only use genuine replacement parts and accessories.

u Carry the pole pruner by the handle with the cutter blade

stopped. When transporting or storing the pole pruner

always t the cutting device cover and dismantle it into its

component parts. Proper handling of the pole pruner will

reduce possible personal injury and injury to others.

Causes and operator prevention of kickback

Kickback may occur when the nose or tip of the guide bar

touches an object, or when the wood closes in and pinches

the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse reac-

tion, kicking the guide bar up and back towards the operator.

Pinching the saw chain along the top of the guide bar may

push the guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of

the chainsaw which could result in serious personal injury.

Do not rely exclusively upon the safety devices built into your

chainsaw. As a chainsaw user, you should take several steps

to keep your cutting jobs free from accident or injury.

Kickback is the result of tool misuse and / or incorrect operat-

ing procedures or conditions and can be avoided by taking

proper precautions as given below:

u Maintain a rm grip, with thumbs and ngers encir-

cling the chainsaw handles. With both hands on the

chainsaw, position your body and arm to allow you to

resist kickback forces. Kickback forces can be control-

led by the operator, if proper precautions are taken. Do not

let go of the chainsaw.

u Do not overreach and do not cut above shoulder

height. This helps prevent unintended tip contact and

enables better control of the chainsaw in unexpected situ-

ations.

u Only use replacement guide bars and chains specied

by the manufacturer. Incorrect replacement guide bars

and chains may cause chain breakage and/ or kickback.

Black Decker PS7525 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info