Bedienungsanleitung Black Decker RC1050EK T1 (Seite 7 von 12) (Englisch)

581264

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

tool is switched off and when it is running idle in addition to

the trigger time.

Labels on tools

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

1. Adjustable shoe

2. Blade clamp lever

3. Auxiliary handle

4. On/off switch

5. Variable speed selector wheel

6. Shoe release button

Assembly

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged and that

the saw blade has stopped. Used saw blades may be hot.

Fitting the saw blade (fig. D)

Hold the saw blade (8) securely. If the saw blade is fitted

with a tooth protector, leave it attached while fitting the

blade.

Pull the blade clamp lever (2) up to release the blade

clamping mechanism.

Insert the shank of the saw blade (8) into the blade holder

as far as it will go.

Move the blade clamp lever (2) down to lock the blade

clamping mechanism.

Remove the tooth protector, if fitted.

Note: This tool has been designed to allow the saw blades

to be fitted with the teeth facing forward or backward.

Auxiliary handle

The auxiliary handle offers a greater choice of gripping

positions. Eight clamping locations are available for the

placement of the auxiliary handle.

Attaching the auxiliary handle (fig. B)

Wrap the handle (3) and strap around the forward gripping

area of the saw.

Make sure that the handle (3) and strap indexing features

(7) are fully engaged in the matching saw positions.

Hook the clamp and strap together and press the clamp

lever to the handle (3) to securely latch the handle.

Check to make sure that the handle (3) is secure before

cutting.

Removing the auxiliary handle.

Lift the clamp lever and unhook the clamp from the strap.

Separate and remove the handle (3) and strap from the

saw.

Adjustable shoe (fig.E)

The shoe (1) will adjust to limit the depth of cut.

Hold the saw with the underside facing up.

Push the shoe release button (6) on the hand grip and slide

the shoe (1) out to one of the three settings and release the

button.

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks cannot be avoided. These include:

Injuries caused by touching any rotating/moving parts.

Injuries caused when changing any parts, blades or

accessories.

Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods make sure you take

regular breaks.

Impairment of hearing.

Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF).

Use

Switching on and off

To switch the tool on, squeeze the on/off switch (4).

To switch the tool off, release the on/off switch (4).

Variable speed selector wheel (fig. C)

The variable speed selector wheel (5) offers a choice of

speeds for greatly improved cutting rates in various

materials.

To select a slower speed for operating the saw, rotate the

wheel to a low number on the dial. To select a higher

speed, rotate the wheel to a higher number.

Sawing (fig. A)

Always hold the tool with both hands.

Warning! To reduce the risk of injury, the user must

read the instruction manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker RC1050EK T1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker RC1050EK T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info