Bedienungsanleitung Black Decker VB2010P (Seite 6 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

531188

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

ENGLISH

Electrical safety

This tool is double insulated;

therefore no earth wire is

required. Always check that the

power supply corresponds to

the voltage on the rating plate.

 If the supply cord is damaged, it must

be replaced by the manufacturer or

an authorised Black & Decker Service

Centre in order to avoid a hazard.

Additional safety instructions for

vacuum cleaners

 Before use, always make sure that

the ﬁlters are correctly seated. Do not

use the appliance without all ﬁlters in

place.

 Do not carry the appliance at the

container handle.

 Do not use the appliance to pick up

liquids.

 Do not use the appliance to pick up

any materials that could catch ﬁre.

 Do not use the appliance near water.

Do not immerse the appliance in water.

 Keep the motor draught away from

your eyes and face.

 Keep children and animals at a safe

distance when using this appliance.

 Always work from bottom up when

using the appliance on stairs, and

keep the appliance at least a stair

below your working position.

 Always be aware of the position of

the power cord and hose while using

the appliance.

 Do not use the appliance without the

suction head or another suitable

accessory mounted to the tube.

 After use, fully rewind the power cord

and store the appliance in a tidy

manner.

 Keep your hair, clothing and gloves

away from moving parts.

 Do not use damaged accessories.

 Use only Black & Decker accessories.

Features

This appliance includes some or all of the

following features:

1. On/off switch

2. Cord rewind button

3. Speed control selector

4. Handle

5. Hose

6. Airﬂow control switch

7. Extension tube

8. Suction head

9. Dust container

10. Wheels

11. Bin full indicator

In addition, this appliance is supplied with

some or all of the following accessories

(ﬁg. A):

12. Crevice tool / Brush tool

13. Upholstery brush

14. Parquet ﬂoor head (VB2010P)

Assembly

Connecting the hose (ﬁg. B)

 Insert the hose connector (15) into

the inlet (16) of the appliance.

 Push the hose until the release

buttons (17) click into place.

 To disconnect the hose, press the

release buttons and pull out the hose.

Connecting the tube (ﬁg. C)

 Push the hose nozzle (18) into the

tube (7).

 To remove the tube, pull the hose out

of the tube.

Mounting the suction head (ﬁg. D)

The suction head (8) allows for

vacuuming on carpet and hard surfaces

(e.g. laminate and tiles).

 Push the tube (7) into the head (8).

 To remove the head, pull the tube out

of the head.

VB2010P - Mounting the parquet

ﬂoor head (ﬁg. D)

The parquet ﬂoor head (14) allows for

vacuuming on wooden and polished

surfaces.

 Push the tube (7) into the head (14).

 To remove the head, pull the tube out

of the head.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker VB2010P Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info