Bedienungsanleitung Black Decker VB2010P (Seite 7 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

531188

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

ENGLISH

Mounting accessories (ﬁg. D)

The crevice tool (12) allows for

vacuuming in narrow and hard-to-reach

places. The brush tool (12) allows for

vacuuming on furniture, blinds, curtains,

windows and stairs. The upholstery brush

(13) allows for vacuuming furniture.

The accessories can be mounted on both

the hose (5) and the tube (7).

 Push the accessory onto the hose

nozzle (18) or the tube (7).

 To remove an accessory, pull the

accessory from the hose nozzle or

the tube.

Selecting the crevice tool or

brush tool (ﬁg. E)

 To use the crevice tool, move the

brush part (19) against the direction

of the arrow.

 To use the brush tool, move the

brush part (19) in the direction of the

arrow.

Use

Unwinding and rewinding the

power cord

The cord rewind button (2) can be

operated by hand or foot.

 Pull a sufﬁcient length of cord from

the back of the appliance.

 After use, press the cord rewind

button to retract the cord into the unit.

Manually guide the cord to ensure it

does not swing back. Ensure the plug

is correctly located.

Adjusting the tube length (ﬁg. F)

The extension tube (7) can be adjusted

as follows:

 Push the knob (20) and slide the tube

to the desired length.

 Release the knob.

Adjusting the suction head (ﬁg. D)

 For vacuuming on carpets, switch the

brush actuator (21) into the up

position.

 For vacuuming on laminates, tiles,

etc., switch the brush actuator into

the down position.

Switching on and off

The on/off switch (1) can be operated by

hand or foot.

 To switch the appliance on, press the

on/off switch (1).

 To switch the appliance off, press the

on/off switch again.

Setting the suction force

The speed control selector (3) allows for

a precise setting of the suction force.

For vacuuming on a hard surface

(e.g. ﬂoors), choose a high speed setting.

For vacuuming on soft surfaces

(e.g. upholstery), choose a low speed

setting.

 Slide the speed control selector to

the desired setting.

Adjusting the airﬂow (ﬁg. G)

Move the airﬂow control switch (6) to

adjust the airﬂow as desired.

Vacuuming

 When operating the appliance, make

sure that the hose is not trapped,

twisted or blocked.

 In case of overheating, a cut-out will

operate and the appliance will

automatically stop.

 If the appliance stops operating,

unplug the appliance and allow it to

cool for 2-3 hours before continuing.

Ensure the ﬁlters are cleaned and the

unit is blockage free before switching

back on.

Hints for optimum use

 When vacuuming stairs, always start

at the bottom and work your way up.

Position the appliance on the ﬂoor

and do the stairs until halfway. Then

carry the appliance to a stable

position which is at least one stair

below your working position, and do

the top half of the stairs.

Carrying the appliance

During use the appliance can be carried

using the handle (4).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker VB2010P Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info