686534
28
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
en Memory
28
BMemory
Memor y
The memory function allows you to save the setting for
a dish and call it up at any time.
The memory function is useful if you prepare one dish
particularly frequently.
Saving memory settings
Example: 360 W, 25 minutes
1. Touch the l field.
The indicator lamp above the field will light up.
2. Touch the microwave power setting you require.
The indicator lamp above the field will light up and
1:00 min will appear in the display.
3. Set the cooking time on the settings area.
4. Touch the l field to confirm.
The clock will reappear. The setting has been saved.
Notes
You cannot save several microwave power settings
one after the other.
You cannot save automatic programmes.
You can save the memory settings and start the
appliance immediately. Do not touch l to finish;
touch the < field instead.
To create a new memory setting: Touch the l field.
The old settings will appear. Save the new
programme as described in steps 1 to 4.
Starting the memory
It is very easy to start the saved programme. Place your
meal in the appliance. Close the appliance door.
1. Touch the l field.
The saved settings will be displayed.
2. Touch the < field.
The cooking time will count down in the display.
The cooking time has elapsed
An audible signal will sound. Open the appliance door
or touch a/s. The clock will reappear.
Pausing
Touch the a/s field once or open the appliance door.
Operation will be paused. The indicator lamp above the
a/s field will light up. After closing the door, touch the
< field again.
Cancelling operation
Touch the a/s field twice or open the door and touch
the a/s field once.
PProgrammes
Pr o g r a mmes
You can prepare food really easily using the various
programmes. You select a programme and enter the
weight of your food. The program then applies the most
suitable settings.
Note: You can choose from 7 programmes.
Setting a programme
Once you have selected a programme, configure the
settings as follows:
1. Touch the % field repeatedly until the required
programme number appears.
The indicator lamp above the field will light up.
2. Touch the x field.
The indicator lamp above the field will light up and a
default value for the weight will appear in the display.
3. Use the settings area to specify the weight of the
dish.
4. Touch the < field.
You will see the cooking time for the programme
counting down.
The cooking time has elapsed
An audible signal will sound. Open the appliance door
or touch a/s. The clock will reappear.
Making amendments
Touch the a/s field twice and reconfigure the settings.
 
PLQ
NJ
PLQ


PLQ
PLQ
NJ
NJ
 
NJ
NJ
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Blaupunkt 5P49K1250 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Blaupunkt 5P49K1250

Blaupunkt 5P49K1250 Installationsanweisung - Deutsch, Englisch, Holländisch, Französisch, Schwedisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info