Bedienungsanleitung Blaupunkt casablanca cm 62 (Seite 9 von 15) (Englisch)

165647

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Casablanca CM 62 4/93

Radio operation

Selecting the waveband

FM - with 3 FM button C.

MW/LW - with M-L button A.

Selecting a station

... using Scan (on/off) 1

If you wish to tune to another station

● press the Scan button 1.

Starting from the currently received radio

programme, the set automatically tunes to

the next station frequencies in upward di-

rection and plays them for 8 seconds. During

search tuning, the display D a shows “SCAN”

and while the radio programmes are previe-

wed the station frequency flashes in the

display D a.

To select a scanned station

● press the Scan button 1 once again.

The Scan function is switched off.

If you do not select a station, the set plays

again the radio programme which was tuned

in before Scan was activated.

... using the search tuning rocker switch

Start automatic search tuning

● by pressing the rocker switch

/ F.

Start search tuning as often as required

until the radio programme of your

choice is tuned in.

If you hold the rocker switch depressed,

search tuning continuous quickly.

... using preset buttons and memory

banks

This function can be used only, if station

frequencies have been stored on the preset

buttons as described in chapter “Storing a

station”.

● To recall FM stations, press the 3 FM

button C until the desired memory

bank I, II, III or T is shown in the display

D c.

● Then press shortly the desired preset

button.

... using Preset Scan (PS) ?

This function allows you to scan and introdu-

ce the stored radio programmes of the se-

lected waveband (in FM mode on all memory

banks I, II, III and T).

This function can be used only, if station

frequencies have been stored on the preset

buttons as described in chapter “Storing a

station”.

● Press PS shortly. The set introduces

the next preset programme.

The programme of this station is played for a

short time, then the next preset programme is

scanned, etc. If no frequency is stored on a

preset button, this preset is skipped.

Preset Scan can be used on all wavebands.

As soon as you have found the programme of

your choice

● press PS once again. Preset Scan is

switched off.

Storing a station

This function can be adjusted separately for

KeyCard 1 and 2.

In the FM mode, six stations can be momori-

zed on each of the three memory banks. Use

the 3 FM button C to select the memory

bank. Another six stations can be stored on

the MW and LW range. Beyond that, the six

strongest FM stations can be stored automa-

tically on the Travelstore bank.

When required, the stored stations can be

recalled by pressing a button.

... using automatic search tuning

If you want to memorize a station frequency

follow the steps below:

● For FM stations, select the memory

bank by pressing the 3 FM button C

as often as required. The display D c

shows I, II, III or T.

To store a station frequency,

● press one of the preset buttons @ until

the radio mute is off and the set resu-

mes reproduction of that programme

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt casablanca cm 62 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt casablanca cm 62

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info