Bedienungsanleitung Blaupunkt casablanca cm 62 (Seite 10 von 15) (Englisch)

165647

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Casablanca CM 62 4/93

DEUTSCH

ENGLISH

ITALIANO

PORTUGUES

NEDERLAND

ESPAGÑOL

SVENSKA

FRANÇAIS

(after about 2 seconds) to indicate that

the station is stored.

The display D d shows which preset button

is pressed.

Follow these steps if you want to store further

stations of all wavebands on the other preset

buttons and memory banks.

If the automatic search tuning stops on a

frequency which was already stored before,

then the corresponding preset button will be

indicated for about 5 seconds in the display

D d together with the memory bank D c,

but the latter only if it is an FM station.

... using Travelstore

The Travelstore function automatically sto-

res the six strongest FM radio stations of your

area and sorts them according to their field

strength. This function is helpful, above all,

on long-distance travels.

To memorize these stations with Travelstore

● press the 3 FM button C for about 2

seconds.

The radio reproduction is muted until the six

strongest stations are stored.

If required, stations can also be stored man-

ually on the Travelstore bank. The display

shows dashes to indicate the free preset

buttons.

... using manual tuning

If you want to manually tune in and store a

station, use the rocker switch << >> G to

enter the frequency.

● Use the 3 FM C or AM A button to

select the waveband.

If you wish to store an FM frequency,

● use the 3 FM button C to select the

memory bank.

● Adjust the frequency with the rocker

switch << >> G.

Store the frequency by

● pressing the preset buttons (until the

set resumes play).

In addition to the stored station frequencies,

the stations tuned in last on each waveband

remain stored.

The mono switching

Your car radio is fitted with a Blaupunkt FM

tuner (Codem III) which provides for mostly

undisturbed reception on the road.

In areas with poor reception conditions or

multipath interferences due to signal echoes,

the radio set switches gradually between

stereo and mono. This considerably impro-

ves the on-the-road reception quality.

To avoid stereo noise common in very critical

reception areas, we recommend to switch to

mono.

To switch between stereo

mono

● press lo 6 for more than 2 seconds.

In mono mode, the stereo indicator D f

goes off.

Adjusting the search tuning

sensitivity

a) with dx and lo 6.

The adjustment is shown in the display

D e and D g.

lo - Normal search tuning sensitivity

(local)

dx - High search tuning sensitivity (di-

stant)

b) via software with DSC

When the station density is extremely

high or low, it can be useful to separa-

tely adjust the level of the two sensitivi-

ties. For this,

● press the DSC button 5.

Press the rocker switch

/ F

until “DIS” (sensitivity level dx) or

“LOCAL” (sensitivity level lo) and a

number between 1 and 3 are shown

in the display D a. Use the dx and

lo button 6 to switch between LO-

CAL and DIS.

● Use the rocker switch << >> G to

adjust the sensitivity:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt casablanca cm 62 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt casablanca cm 62

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info