165764
16
Zoom out
Zoom in
Vorherige Seite
1/33
Nächste Seite
16
Switching between the memory
banks (FM)
You can switch between the memory banks
I, II and T in order to store stations and re-
call them later.
The currently selected memory bank will
appear in the display.
Press BND as many times as neces-
sary until the desired memory bank li-
ghts up in the display.
Storing stations
On FM, you can store five stations on the
station selection keys 1, 2, 3, 4, 5, for each
of the memory banks (I, II, T).
On MW/LW, you can also store five stati-
ons each.
Select the appropriate waveband by
pressing BND.
Tune into a station with the rocker
switch (either automatically
/ or
manually << >>).
Press the desired station selection key
until the radio resumes play after the
muting (approx. 2 seconds) or until you
hear a beep.
Now the station has been stored.
The display will indicate which station sel-
ection key is currently activated.
Note:
If you attempt to store a station which has
already been stored, the corresponding sta-
tion key and the memory bank will flash in
the display if you are on a different memory
bank.
Automatically storing the
stations with the strongest
reception with Travelstore
You can automatically store the five FM sta-
tions with the most powerful signals in your
current reception area sorted according to
their signal strength. This function is parti-
cularly convenient on longer trips.
Press BND for 2 seconds.
“T-STORE” will appear in the display.
The five strongest FM stations will be auto-
matically stored on the “T” memory bank
(Travelstore). When this process has been
completed, the radio will play the strongest
station.
If desired, stations can also be stored ma-
nually in the Travelstore bank (see “Storing
stations”).
Recalling stored stations
You can recall any stored station at the touch
of a key.
Select the waveband by pressing
BND. For FM, also choose the corre-
sponding memory bank by pressing
BND as many times as necessary until
the desired memory bank appears in
the display.
Press the corresponding station selec-
tion key briefly to recall the station.
Scanning stored stations with
Preset Scan
You can scan all of the stored stations on
any of the wavebands and in the selected
FM memory bank.
Preset Scan will not start unless PTY is
switched off (“PTY” will not light up in the
display).
If necessary press PTY.
To start Preset Scan:
Press SC for approx. 2 seconds.
All of the stations stored on the waveband
selected will be scanned one after the other.
“PS-SCAN” will flash in the display, alterna-
ting with the station name or frequency.
Radio operation with RDS (Radio Data System)
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Blaupunkt viking tmc 148 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Blaupunkt viking tmc 148

Blaupunkt viking tmc 148 Bedienungsanleitung - Deutsch - 32 seiten

Blaupunkt viking tmc 148 Installationsanweisung - Alle Sprachen - 21 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info