Bedienungsanleitung Blaupunkt viking tmc 148 (Seite 20 von 33) (Englisch)

165764

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Traffic information station reception with RDS-EON

The abbreviation “EON” stands for Enhan-

ced Other Networks, which means that in-

formation is exchanged within a radio net-

work.

Many FM radio stations provide their ser-

vice area with traffic messages at regular

intervals.

Along with their programmes, all traffic in-

formation stations transmit a special carrier

signal, which is decoded by your car radio.

If this signal is identified, “TP” will appear in

the display (Traffic Program).

In addition to these, there are also stations

which do not actually transmit traffic infor-

mation themselves, but by using RDS-EON

it is possible for them to forward the traffic

messages broadcast by another traffic in-

formation station in the same radio network.

If you want to have the priority for traffic

announcements activated while listening to

one of these stations (e.g. NDR3), “TA” must

appear on the display panel.

If a traffic announcement is broadcast, the

radio will automatically switch to the linked

traffic programme station (in this case,

NDR2) for the duration of the message and

return to the original programme (NDR3)

afterwards.

Traffic announcement priority

on/off

If the priority for traffic announcement pro-

grammes is activated, “TA” will light up in

the display.

To switch the priority on or off:

• Press TA.

If you press TA while a message is being

broadcast, this message will be interrupted.

The unit will then switch back to the pre-

vious mode. The priority for any following

traffic messages remains active.

Please note that several buttons have no

function while a traffic announcement is

broadcast.

Warning beep

If you leave the reception area of the traffic

information station you are currently tuned

into, you will hear a warning beep at inter-

vals of approx. 30 seconds.

This warning beep will also be emitted if you

press a preset button for a station which

does not send the traffic information signal.

Switching the warning beep off

a) Tune into another station offering traf-

fic information:

• Press the rocker switch or

• press a station selection key which

has a traffic information station allo-

cated to it.

b) Switch off the priority for traffic an-

nouncements:

• Press TA.

“TA” will disappear from the display.

Automatic seek tuning start

(CD mode)

If you leave the reception area for the traffic

information station you have tuned into whi-

le you are listening to a CD, the system will

automatically start searching for a new TA

station. If no such station is found within ap-

proximately 30 seconds, a warning beep will

sound every 30 seconds. To switch the

warning beep off, proceed as described abo-

ve.

Adjusting the volume for traffic

announcements and the warning

beep

This volume was preset at the factory and

is the same volume as is used for TMC an-

nouncement. You can, however, use the

DSC function to alter the setting as desired

(see “DSC programming - TA VOL”).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt viking tmc 148 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt viking tmc 148

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info