Bedienungsanleitung Blaupunkt viking tmc 148 (Seite 19 von 33) (Englisch)

165764

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

• Press << or >>; the programme type

selected last will be displayed for

3 sec.

• During this period press >> (for-

wards) or << (backwards) to select

the desired programme type.

• Press << or >> as many times as re-

quired.

If you would like to listen to a station

with the selected PTY,

• press

/ to start the seek tuning

function.

If the radio is unable to find a station offe-

ring the selected programme type, the dis-

play will show “NO PTY” and you will hear a

beep tone. The radio will select the station

which was playing before seek tuning was

activated.

Storing programme types

Each of the station selection keys 1 - 5 has

been assigned one programme type at the

factory.

If desired, you can also replace these with

other available programme types.

To do so, make sure that “PTY” lights up in

the display.

• If necessary, press PTY to switch on

the function.

• Select a programme type with << >>

and

• hold down the desired station selection

key (1 - 5) until you hear a beep.

Now the selected programme type can be

recalled by pressing this station selection

key when “PTY” appears in the display.

Scanning stations with PTY SCAN

Important: PTY must appear in the display.

• Press SC.

All of the stations in your current reception

area offering the selected programme type

will be scanned.

To switch off PTY-SCAN:

• Press SC or the seek-tuning rocker

switch once again.

PTY priority

Situation:

PTY is switched on and lights up in the dis-

play.

No station offering the selected programme

type can be found currently in your recepti-

on range (with seek tuning or scan).

The car radio will switch back to the station

previously tuned into.

As soon as it is possible to receive a pro-

gramme in the broadcasting network with

the PTY selected, the radio will switch over

to the corresponding station for the durati-

on of the programme.

Example:

- Station playing: NDR3.

- “PTY” lights up in the display.

- Programme type “POP” selected.

- Seek tuning is started.

- No station with “PTY-POP” can be

found.

- The display shows “NO PTY” and

- automatically switches back to NDR3.

- NDR2 airs a “PTY-POP” programme.

- The radio will switch to the linked stati-

on NDR2 for the duration of the “POP”

programme.

During CD operation, the car radio will also

switch to the programme offering the selec-

ted PTY within the broadcasting network.

After the PTY programme has ended the

system will switch back to the previous mode

(radio or CD).

Note:

As already mentioned, these functions are

not supported by all of the RDS stations at

the present time.

Radio operation with RDS (Radio Data System)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt viking tmc 148 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt viking tmc 148

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info