Bedienungsanleitung Blendtec Professional-Series (Seite 7 von 11) (Englisch)

626836

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

1312

6.2 AUTOMATIC CYCLE OPERATION

As shown in Figure 5, the Blendtec Professional Series has automatic blending

cycles for batters, ice crush, smoothies, ice cream, whole juice and soups. These

cycles have variable speed settings that will change during the course of the cycle.

This allows the blender to draw the contents down into the blending vortex, which

creates the desired uniform texture. The blender will run its pre-programmed cycle

and automatically shut off. If at any point you want to stop the blender before it has

completed its cycle, press any button.

Batters: Use this blend cycle to mix, whip and blend batters, sauces, dips,

and dressings.

Ice Crush: Use this button to blend your mixed drinks, milkshakes, or to crush ice.

Smoothie: Use this button to blend your smoothies.

Ice Cream: Use this button to make ice cream.

Whole Juice: Use this button to make whole juice and green drinks.

Soup: Use this button to make hot soup and hot chocolate.

Pulse: Use this button to chop, mince, whip or do other momentary tasks

which do not require a long blend cycle.

Speed Up: Use this button to speed up.

Speed Down: Use this button to decrease speed.

SECTION 5 – CARE AND CLEANING

5.1 AFTER-USE CLEANING

1. Add 1 cup (240 ml) of hot water and a drop of liquid dishwashing soap to the jar.

2. Place the lid tightly onto the jar. Place the jar on the blender base and, with your

hand placed on top of the lid, press the pulse button for 5 seconds.

3. Rinse with clear water until all soap is rinsed from jar and lid.

4. Clean the blender base by simply wiping the base and touchpad with a damp cloth.

5.2 LONG-TERM SANITATION

1. Fill the jar with hot water.

2. Add one teaspoon (5 ml) of liquid chlorine bleach.

3. Stir for 10 seconds to mix water and bleach. Let mixture stand in jar for 5 minutes.

4. Empty water/bleach mixture. Turn jar upside down on dish rack until dry.

5.3 CLEANING TIPS AND CAUTIONS

• Do not use abrasives or stiff brushes to clean the blender base or jar as this will dull

or scratch the surface. Cosmetic damage is not covered by warranty.

• NEVER submerge the blender motor in water. Avoid submerging blender jars for

more than 5 minutes. Water penetration through the lower jar seals will reduce the

life of the jar.

• JAR IS DISHWASHER SAFE—TOP RACK ONLY! Extreme temperatures damage

the lower seals of the jar. We recommend the jar be hand-washed, and not

subjected to temperatures above 185°F, 85°C.

SECTION 6 – OPERATIONAL OVERVIEW

6.1 MAIN POINTS OF OPERATION

1. Plug in the blender.

2. Turn on the main power switch located on the front and center of the blender

motor base.

3. The LED information center will display the number of cycles the blender has run.

4. Secure the lid to the jar and place the appropriately ﬁlled jar on the base, making

sure the jar is secure.

5. Press the desired touch pad button once to start a blend cycle. You may press

any button stop the cycle.

6. When cycle is complete, remove the jar and serve.

FIGURE 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blendtec Professional-Series Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info