Bedienungsanleitung Blomberg WNF 6100 WEN (Seite 11 von 63) (Englisch, Dänisch)

582094

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Auxiliary function selection

Selectthedesiredauxiliaryfunctionsbeforestarting

the programme. Furthermore, you can also select

orcancelauxiliaryfunctionsthataresuitableto

the running programme without pressing the Start

/Pause/Cancelbuttonwhenthemachineis

operating.Forthis,themachinemustbeinastep

beforetheauxiliaryfunctionyouaregoingtoselect

or cancel.

Iftheauxiliaryfunctioncannotbeselectedor

canceled, light of the relevant auxiliary function will

blink3timestowarntheuser.

 Somefunctionscannotbeselectedtogether.Ifa

second auxiliary function conflicting with the first

oneisselectedbeforestartingthemachine,the

functionselectedfirstwillbecanceledandthe

second auxiliary function selection will remain

active.

 Anauxiliaryfunctionthatisnotcompatible

withtheprogrammecannotbeselected.(See

"Programmeandconsumptiontable")

 AuxiliaryFunctionbuttonsmayvaryaccordingto

the model of the machine.

• Prewash

A Prewash is only worthwhile for heavily soiled

laundry. Not using the Prewash will save energy,

water, detergent and time.

As their meshed texture causes excessive

foaming,washtheveils/tullebyputtinglittle

amount of detergent into the main wash

compartment.Donotputdetergentinthe

prewash compartment.

• Rinse Plus

Thisfunctionenablesthemachinetomakeanother

rinsing in addition to the one already made after the

mainwash.Thus,theriskforsensitiveskins(babies,

allergicskins,etc.)tobeeffectedbytheminimal

detergentremnantsonthelaundrycanbereduced.

• Rinse Hold

Ifyouarenotgoingtounloadyourclothes

immediately after the programme completes, you

can use rinse hold function to keep your laundry

in the final rinsing water in order to prevent them

from getting wrinkled when there is no water in the

machine.

InmodelsequippedwithSpinSpeedAdjustment

button,selecttheSpinSpeedandpressStart/

Pause/Cancelbuttonifyouwanttospinthelaundry

held in water.

InmodelsnotequippedwithSpinSpeedAdjustment

button,selectSpin+Pumpprogrammeifyouwantto

spin your laundry held in water.

 Inthesemodels,youneedtostopthemachine

bypressingStart/Pause/Cancelbutton

beforeswitchingtospinstepandafterpump

step is completed and the water in the machine

is drained. Thus, water inside the machine is

drained and your laundry is not spun.

• No Heat

Usethisfunctionifyouwanttowashyourlaundryin

cold water.

• No Spin

Usethisfunctionifyoudonotwantyourclothesbe

spun at the end of the programme.

• Spin speed reduction

This function allows spinning of laundry at a speed

lower than the maximum spin speed of the machine.

WhenSpinReductionbuttonispressed,spinspeed

willbelimitedtotheminimumspeedspecifiedonthe

control panel.

Starting the programme

PressStart/Pause/Cancelbuttontostartthe

programme.Start/Pause/Cancelbuttonlightsup

to indicate that the programme has started. Loading

doorislockedandLoadingDoorlightturnsoff.

Child Lock

UseChildLockfunctiontopreventchildrenfrom

tampering with the machine. Thus you can avoid any

changes in a running programme.

 YoucanswitchonandoffthemachinewithOn

/OffbuttonwhentheChildLockisactive.When

you switch on the machine again, programme

will resume from where it has stopped with the

childlockenabled.

To activate the Child Lock:

Press and hold 1

and 2

Auxiliary Function

buttonsfor3secondssimultaneouslyafterwashing

programme has started. The 1

Auxiliary Function

light flashes continuously.

To deactivate the Child Lock:

Childlockmustbedeactivatedtostartanew

programme after the programme has finished or to

interrupt a running program.

Press and hold 1

and 2

AuxiliaryFunctionbuttons

for3secondssimultaneouslytodisablechildlock.

Progress of programme

Progressofarunningprogrammecanbefollowed

fromtheProgrammeFollow-upindicator.Atthe

beginningofeveryprogrammestep,therelevant

indicator light will turn on and light of the completed

step will turn off.

To change the auxiliary function, speed and

temperature settings while a program is running, you

need to switch the machine to Pause mode. Press

Start/Pause/Cancelbuttontoswitchthemachine

intoPausemode.Inthiscase,Start/Pause/Cancel

light flashes.

 Ifthemachinedoesnotpasstothespinning

step,RinseHoldfunctionmightbeactiveorthe

automaticunbalancedloaddetectionsystem

mightbeactivatedduetotheunbalanced

distributionofthelaundryinthemachine.

Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases

whenthewaterlevelisunsuitable.

When machine is switched to Pause mode, it checks

thelevelofthewaterinside.Ifthelevelissuitable,

LoadingDoorlightilluminatessteadilywithin1-2

minutesandtheloadingdoorcanbeopened.

IftheLoadingDoorlightisnoton,LoadingDoor

cannotbeopened.Ifyouareobligedtoopenthe

LoadingDoorwhiletheLoadingDoorlightisoff,you

must cancel the current programme; see "Canceling

the programme".

Blomberg WNF 6100 WEN Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info