Bedienungsanleitung Blomberg WNF 6100 WEN (Seite 12 von 63) (Englisch, Dänisch)

582094

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Changing the selections after

programme has started

To change your settings after the program has

started, you have to switch the machine to Pause

mode first.

 Evenifyouselectanewprogrambychanging

thepositionoftheProgrammeSelectionknob

while the machine is running or in Pause mode,

the programme selected first will continue. You

must cancel the current programme to change

the washing programme. See "Canceling the

programme".

Changing the auxiliary function, speed and

temperature

Dependingonthesteptheprogrammehasreached,

you can cancel or activate the auxiliary functions;

see, "Auxiliary function selection".

You can also change the speed and temperature

settings; see, "Spin speed selection" and

"Temperature selection".

Adding or taking out laundry

PressStart/Pause/Cancelbuttontoswitchthe

machinetopausemode.WaituntiltheLoadingDoor

canbeopened.

 IftheLoadingDoorlightdoesnotturn

onin1-2minutes,itmeansthatthewaterlevelin

themachineisnotsuitableandlaundrycannotbe

added.Youcanresumetheprogrammebypressing

Start/Pause/Cancelbutton.OpentheLoading

Doorandaddortakeoutthelaundry.Closethe

LoadingDoor.Makechangesinauxiliaryfunctions,

temperature and speed settings if necessary. Press

Start/Pause/Cancelbuttontostartthemachine.

Canceling the programme

PressandholdStart/Pause/Cancelbuttonfor3

seconds to cancel the current programme. At the

end of this period, machine can drain the water inside

it or can take in and drain water up to 3 times to cool

down the laundry. Washing and End lights turn on.

Oncedrainingiscomplete,Start/Pause/Cancel

andWashinglightsturnoff,andLoadingDoorlight

starts flashing.

WhentheLoadingDoorisopenable,LoadingDoor

lightturnsonandremainslit.Inthiscase,youcan

select and start the new programme.

End of programme

Endlightintheprogrammefollow-upindicatorwill

light up once the programme comes to an end.

PressOn/Offbuttontoswitchoffthemachine.Take

out your laundry and close the loading door. Your

machine is ready for the next washing cycle.

5 Maintenance and cleaning

Servicelifeoftheproductextendsandfrequently

facedproblemsdecreaseifcleanedatregular

intervals.

Cleaning the detergent drawer

Clean the detergent drawer at regular intervals (every

4-5washingcycles)asshownbelowinorderto

prevent accumulation of powder detergent in time.

Press the dotted point on the siphon in the softener

compartment and pull towards you until the

compartment is removed from the machine.

 Ifmorethannormalamountofwaterand

softener mixture starts to gather in the softener

compartment,thesiphonmustbecleaned.

Wash the detergent drawer and the siphon with

plentyoflukewarmwaterinawashbasin.Wear

protectiveglovesoruseanappropriatebrushto

avoid touching of the residues in the drawer with your

skinwhencleaning.Insertthedrawerbackintoits

place after cleaning and make sure that it is seated

well.

Cleaning the water intake filters

There is a filter at the end of each water intake valve

at the rear of the machine and also at the end of

each water intake hose where they are connected to

thetap.Thesefilterspreventforeignsubstancesand

dirt in the water to enter the washing machine. Filters

shouldbecleanedastheydogetdirty.

Close the taps. Remove the nuts of the water intake

hoses to access the filters on the water intake valves.

Cleanthemwithanappropriatebrush.Ifthefiltersare

toodirty,takethemoutbymeansofpliersandclean

them. Take out the filters on the flat ends of the water

intake hoses together with the gaskets and clean

thoroughly under running water. Replace the gaskets

and filters carefully in their places and tighten the

hosenutsbyhand.

Draining remaining water and

cleaning the pump filter

The filter system in your machine prevents solid items

suchasbuttons,coinsandfabricfiberscloggingthe

pump impeller during discharge of washing water.

Thus,thewaterwillbedischargedwithoutany

problemandtheservicelifeofthepumpwillextend.

Ifthemachinefailstodrainwater,thepumpfilter

isclogged.Filtermustbecleanedwheneveritis

cloggedorinevery3months.Watermustbedrained

off first to clean the pump filter.

Inaddition,priortotransportingthemachine(eg.,

when moving to another house) and in case of

freezingofthewater,watermayhavetobedrained

Blomberg WNF 6100 WEN Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info