Bedienungsanleitung Bomann bz 9482 cb (Seite 12 von 84) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

364279

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

• Keep CO2 cartridges out of the reach of children.

• Do not tamper with the cartridge.

• Avoid contact with the cartridge at freezing

temperatures (risk of frostbite) and do not use.

• Only use the 16g CO2 cartridges intended for the

dispenser. The use of other cartridges will invalidate

the warranty.

• Only dispense of the CO2 cartridge when empty.

Technical data

Model: BZ 9482 CB

Power supply: 220-240V AV/50Hz

Power: 72 Watt

Protection class: II

Dimensions (L x W x H

in mm): 480 x 300 x 450

Beer keg: Standard 5 litre party keg

Housing material: ABS

Contents, accessories and technical data subject to

changes without prior notice!

List of parts

1 Chiller 12 CO2 cartridge chamber

cover

2 Lid 13 CO2 cartridge holder

3 Lid opener 14 CO2 cartridge holder

4 Keg holder 15 Front tube cover

5 Keg tap 16 Pressure regulator

6 End of dispensing unit 17 Main switch

7 CO2 feed valve 18 LED temperature

indicator

8 Beer tap 19 Tools for removing keg

stopper

9 Tap handle 20 Universal adapter

10 Collecting tray 21 Cleaning balloon

11 Drip tray 22 CO2 cartridge

Intended use

This dispenser serves for chilling dispensing beer from

standard 5 litre party kegs.

It must be used for this particular purpose only.

It must only be used in the manner described in these

operating instructions.

This beer dispenser must not be used for commercial

purposes.

Use for any other purpose is considered improper and

not for the intended purpose and can result in damage to

property and personal injury.

Bomann GmbH is not liable for any damage attributed to

improper use.

Dear Customer,

Congratulation on the purchase of your beer dispenser. You

will now be able to enjoy cool, draught beer in the comfort

of your own home.

There are numerous beers to choose from available in 5

litre party kegs.

Before using the dispenser, please read the instructions for

use and safety information.

Installation

WARNING!

• Before ﬁ tting or removing any parts, always

disconnect the plug from the mains socket!

1. Remove the beer dispenser from the packaging.

2. Place the beer dispenser on a stable, horizontal, level

and non-slip surface. Ensure that there is at least

10cm of space around the dispenser for optimal

operation.

3. Fit the collecting tray/drip tray.

Ensure that the collecting tray/drip

tray does not protrude beyond the

surface.

4. Fit the silicon ring in the threaded

part of the tap. Screw the tap tool

below the dispensing unit.

5. Attach the tap handle. When ﬁ tting

the handle, ensure that the hole in

the bottom of the handle ﬁ ts

exactly on the metal pin on the top

of the tap.

6. Clean the dispensing unit as described in the

instructions in Chapter "Dismantling and cleaning the

beer dispenser".

7. Check that the main switch at the back of the

dispenser is set to "0" and plug the plug into the

main socket.

8. Set the main switch to "I".

9. Check the LED indicator to ensure that the dispenser

is on.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann bz 9482 cb Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bomann bz 9482 cb

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info