Bedienungsanleitung Bomann DG 2286 CB (Seite 48 von 94) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

651938

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

Using the rice bowl

1. Put rice or other foods with sauce or liquid in the rice bowl.

2. Place the rice bowl into a steam bowl.

3. Finally, put the lid on.

NOTE:

Please continue observing our “Cooking instructions”.

There you will nd suggestions on water quantities for

different rice grades.

Functions

The steamer features different functions:

• Select the cooking time and the steamer will start operation

after approx. 5 seconds automatically.

• You may also set the timer for the food to be ready at a

preset time.

• After the steamer has cooked for the set amount of time, it

will enter a keep-warm mode.

• Overheat protection: If the water is used up, the device will

turn off after some time.

Initial operation

• After lling with water, rst place the collection tray and then

the steam bowls and the lid.

• Position the lid with the steam opening on the back.

Mains connection

1. Check if the mains voltage that you want to use matches

that of the appliance. You will nd the information about this

on the type plate of the basic unit.

2. Check the switch setting of the ON/OFF switch. It must be

disengaged.

3. Connect the device to a properly installed isolated ground

receptacle.

Operating instructions

Instant steam function

1. Turn the appliance on with the ON/OFF switch. You will

hear a signal tone. The display and the pilot lamp will light

up blue.

2. Press SET button once. The display will show the default

setting of 5 minutes “00:05”.

3. If you wish to steam cook longer than 5 minutes, set the

cooking time by pressing the minute button MIN repeatedly

or the hour button HR for 1 hour setting.

4. If the set cooking time is longer than 50 minutes, please

rell with water during operation before the 50 minutes

have elapsed. Otherwise the device will turn off.

NOTE:

• The maximum time setting is 1 hour and 59 minutes.

• During this process the readout “STEAMER” (translated:

steamer) will blink on the upper right of the display.

NOTE:

• If you wish to change your input, press and hold the

respective button MIN or HR until the desired values are

displayed.

• If no button is pressed within 5 seconds after input, the

device will start heating water automatically. The readout

“STEAMER” will then illuminate steadily. The control

lamp changes from blue to red.

• The timer counts down. When elapsed, 5 signal tones

will alert you that the cooking has been nished.

Delayed cooking

1. Turn the appliance on with the ON/OFF switch. You will

hear a signal tone. The display and the pilot lamp will light

up blue.

2. Press SET button once. The display will show the default

setting of 5 minutes “00:05”.

3. Set the cooking time by pressing minute button MIN repeat-

edly or hour button HR for 1 hour setting.

4. Press SET button a second time.

5. Set the time for the device to start cooking, using the MIN

and/or HR buttons.

NOTE:

• During this process the readout “TIMER” (translated:

timer) will ash on the upper right of the display.

• You may delay cooking by maximum 12 hours and

59 minutes.

• If you wish to change your input, press and hold the

respective button MIN or HR until the desired values are

displayed.

• If no button is pressed within 5 seconds after input, the

timer will automatically start to count down. The readout

“TIMER” will then illuminate steadily. When the time of

the TIMER has elapsed, the device will automatically turn

to “STEAMER” mode and start cooking. The control lamp

changes from blue to red.

WARNING:

Never operate the device unattended. When setting the

timer to delay cooking, set a time that ensures operation with

proper supervision.

Keep-warm mode

• After the cooking time has elapsed, a signal tone will sound

5 times.

• The display will show the readout “00:00”, and below that

“KEEP WARM”.

• The control lamp will change from red to blue. The keep-

warm mode starts.

• The heater will turn on and off in intervals. During heating

the control lamp will light up red.

• The device counts the minutes onwards. The display will

show the elapsed time during keep-warm mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann DG 2286 CB Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info