Bedienungsanleitung Bomann EBK 7940 (Seite 25 von 32) (Deutsch, Englisch)

814381

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

- If you do not select a power level within one

minute, the hob switches off automatically.

- You can change the power level at any time

during cooking.

• To switch off a cooking zone, select the cooking

zone again and set the power level back to 0.

Residual heat indicator

WARNING: Risk of burns!

Do not touch the cooking zones while the residual

heat indicator lights up.

After switching off the cooking zone, the residual

heat of the corresponding zone is indicated with [H].

This warns against touching the zone.

Automatic boiling

This function automatically switches from high power

for boiling/heating to the previously selected lower

power for further cooking.

• Set the power level for the desired zone to 9 and

press the button (M5), the corresponding zone

display shows [A] and [9] alternately.

• Within the next 30 seconds, select the lower

power level required for you to continue cooking.

The table below shows the cooking time (min) for

each power level (PL):

min

1 3 4.8 6.5 8.5 2.5 3.5 4.5 5

NOTE:

When changing the power level, the elapsed time is

automatically included in the corresponding cooking

time for the new power level.

Safety child lock

The appliance is equipped with a locking function to

prevent unintentional operation.

• Keep pressing the button (M6) for approx. 3 sec-

onds to activate (deactivate) the safety child lock.

The timer display indicates activation with [Lo].

All buttons, except the power button are locked

for operation.

When the timer function is active, the timer display

alternately shows the remaining time and [Lo].

Timer function

General information

• You can use the timer to automatically end the

cooking process on one or more zones after a

preset time.

• The timer can be set between 1 and 99 minutes.

As long as the minute display flashes in the timer

display, the setting can be overwritten.

• A red dot next to the power level indicates that a

timer has been set for this zone.

• The power level can be corrected at any time

without changing the time setting.

• The timer function is cancelled when the appli-

ance is switched off.

Using the timer to switch off one cooking zone

• Select the cooking zone that is already in opera-

tion and for which you want to set the timer.

• Press the button (M7) for the timer. The timer dis-

play lights up [00].

• Set the time using buttons (M5) and/or (M8).

The timer display shows the remaining time.

Using the timer to switch off several cooking zones

• Do the timer setting for several cooking zones as

described under

"Using the timer to switch off one

cooking zone".

The timer display shows the remaining time of the

cooking zone for which the shortest maturity was se-

lected. The cooking zone can be recognized by the

flashing dot next to the power level.

When the operation period of this cooking zone is

elapsed, the display shows the remaining time of the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann EBK 7940 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info