Bedienungsanleitung Bomann EH 3551 G (Seite 10 von 12) (Englisch)

652465

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

• Open the appliance

door completely.

• Push the retaining brackets

(a) of

the hinges on both sides up-

wards.

• Slightly close the door and

lift it up to remove it.

• When reinstalling the door, m

ake sure the notch

of the hinge is properly aligned with the protrusion

of the hinge holder.

• Then press down the

Then press down the Then press down the

Then press down the

retaining brackets (a)

retaining brackets (a)retaining brackets (a)

retaining brackets (a)

otherwise the hinges could get damaged when

closing the oven door.

Cleaning the

Cleaning the Cleaning the

Cleaning the oven

ovenoven

oven

NOTE

NOTENOTE

NOTE:

By cleaning after each use,

you avoid that food r

siduals and soiling will be burning-

in at

eration. Then the cleaning is only

possible

of effort.

• Clean the appliance

and accessories depending

on the soiling degree and

depending on the su

face only with a so

ft, damp cloth and commercia

ly, food safe cleaners.

•

Soak heavily soiled areas with some warm soapy

water or a vinegar cleaner.

•

Wipe off grease residues from the sealing framed

the cooking chamber.

• Use a soft absorben

t cloth for drying after clea

ing.

Cleaning the glass panel

Cleaning the glass panelCleaning the glass panel

Cleaning the glass panel

If necessary, clean the inside of the glass pane

• Open the appliance door.

• Press the release button

laterally in the doorframe

in order to remove the

brackets (b).

• Loosen the retaining strip (c).

• Take off the glass carefully

forward.

door completely.

(a) of

lift it up to remove it.

ake sure the notch

of the hinge is properly aligned with the protrusion

retaining brackets (a)

retaining brackets (a)retaining brackets (a)

retaining brackets (a)

again,

again,again,

again,

otherwise the hinges could get damaged when

you avoid that food r

in at

the next op-

possible

with a lot

and accessories depending

depending on the su

ft, damp cloth and commercia

Soak heavily soiled areas with some warm soapy

Wipe off grease residues from the sealing framed

t cloth for drying after clea

If necessary, clean the inside of the glass pane

in order to remove the

forward.

• Replace the glass panel

, the retaining strip and

brackets properly;

after you’

and dried it thoroughly.

Reverse the bulb

Reverse the bulbReverse the bulb

Reverse the bulb

WARNING:

WARNING:WARNING:

WARNING:

•

Make sure that the appliance is turned off from

the power supply (fuse).

•

Allow the lamp to cool down before replacing the

bulb.

There is risk of burns!

There is risk of burns!There is risk of burns!

There is risk of burns!

NOTE

NOTENOTE

NOTE:

Use the correct bulb, heat resistant up to 300°C:

1 x 15

1 x 151 x 15

1 x 15

W, 230 V

, 230 V, 230 V

, 230 V~

•

Unscrew the lamp cover anti

it with a dry cloth.

• Change the bulb.

• Reattach the

lamp cover and screw it tight in a

clockwise direction.

• Check the functionality.

Trou

TrouTrou

Trou

bleshooting

bleshootingbleshooting

bleshooting

Before you contact an

Before you contact an Before you contact an

Before you contact an

authorized specialist

authorized specialistauthorized specialist

authorized specialist

Problem

ProblemProblem

Problem

Possible causes

Possible causesPossible causes

Possible causes

Appliance

does not

work

The power supply

disconnected.

The oven

lamp does

not work

The bulb is defe

tive,

has been

inserted incorrectly

or not firmly.

Strong for-

mation of

smoke

Grease residue in

the oven.

NOTE:

NOTE:NOTE:

NOTE:

If a problem still persists after following the steps

above, contact your distributor or an authorized tec

nician.

, the retaining strip and

after you’

ve cleaned the glass

Make sure that the appliance is turned off from

Allow the lamp to cool down before replacing the

There is risk of burns!

There is risk of burns!There is risk of burns!

There is risk of burns!

Use the correct bulb, heat resistant up to 300°C:

Unscrew the lamp cover anti

-clockwise and clean

lamp cover and screw it tight in a

bleshooting

bleshootingbleshooting

bleshooting

authorized specialist

authorized specialistauthorized specialist

authorized specialist

Possible causes

Possible causesPossible causes

Possible causes

What to do

What to doWhat to do

What to do

The power supply

disconnected.

Check the fuse

of your domestic

wiring system.

The bulb is defe

has been

inserted incorrectly

Check the bulb,

see “Reverse

the bulb”.

Grease residue in

Switch off the

oven and allow

to cool down for

cleaning.

If a problem still persists after following the steps

above, contact your distributor or an authorized tec

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann EH 3551 G Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bomann EH 3551 G

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info