Bedienungsanleitung Bomann EH 561 (Seite 7 von 16) (Englisch)

652464

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Drill two mounting holes

Ø 7 mm at the respective

positions in the wall, meas-

ured in a height from the

ground level of about

750 mm. Insert the dowels

and screw in the hooks.

• Connect the chains

with the hooks.

Electrical connection

Electrical connectionElectrical connection

Electrical connection

Information for the

Information for the Information for the

Information for the

authorized expert

authorized expertauthorized expert

authorized expert

WARNING:

WARNING:WARNING:

WARNING:

•

The installation to the mains supply must conform

to the local standards and regulations.

•

Connecting the appliance to a domestic power

socket or using multiple sockets or extension c

bles is not permitted.

• Improper connection m

ay cause to an

shock

shockshock

shock!

•

Before connecting, ensure that the power supply

corresponds with the information on the rating l

bel and the wiring diagram.

•

The appliance is suitable for three

current (400V 3N~50/60Hz).

• The appliance can be

adjusted for single

current by a respective bypass on the terminal

block,

based on the circuit diagram below. Select

a suitable cord as mains cable, considering the

connection type and nominal power of the oven.

•

Fix the mains cable in the tension

•

Make sure to connect the protective ground to the

terminal of

the marked terminal block.

•

The electrical installation of the oven should be

equipped with an emergency switch, which

switches off the whole appliance from the mains

supply in an emerge

ncy. The distance between

the contacts of the emergency switch must be at

least 3 mm.

with the hooks.

authorized expert

authorized expertauthorized expert

authorized expert

The installation to the mains supply must conform

to the local standards and regulations.

Connecting the appliance to a domestic power

socket or using multiple sockets or extension c

ay cause to an

electric

electric electric

electric

Before connecting, ensure that the power supply

corresponds with the information on the rating l

The appliance is suitable for three

-phase and AC

adjusted for single

-phase

current by a respective bypass on the terminal

based on the circuit diagram below. Select

a suitable cord as mains cable, considering the

connection type and nominal power of the oven.

Fix the mains cable in the tension

relief.

Make sure to connect the protective ground to the

the marked terminal block.

The electrical installation of the oven should be

equipped with an emergency switch, which

switches off the whole appliance from the mains

ncy. The distance between

the contacts of the emergency switch must be at

•

Arrange the mains cable in such a way that it

does not get in contact with any hot components

of the appliance. Do not lead it over sharp edges

or corners.

Connection

Connection Connection

Connection wiring diagram

wiring diagramwiring diagram

wiring diagram

Permissible connection methods

Permissible connection methodsPermissible connection methods

Permissible connection methods

CAUTION:

CAUTION:CAUTION:

CAUTION:

Each connection requires the protective ground of the

mains to be connected to the E

HINWEIS

HINWEISHINWEIS

HINWEIS:

L1, L2, L3 = Phase

N = Neutrale Leitung

E = Schutzleiter

Recommendation is the connection

Recommendation is the connectionRecommendation is the connection

Recommendation is the connection

phase circuit 3 x 16 A!

phase circuit 3 x 16 A!phase circuit 3 x 16 A!

phase circuit 3 x 16 A!

220-240V~

50/60Hz

380-

415V 3N~

50/60Hz

H05 VV-F 3G

4mm²

H05 VV-

F 5G

1.5mm²

Startup / Operation

Startup / OperationStartup / Operation

Startup / Operation

Before initial use

Before initial useBefore initial use

Before initial use

• Clean the

hob as well as the

therein located accessories. Follow the instru

tions that we give you in the chapter "Cleaning

and Maintenance".

•

In order to burn any manufacturing residue

Heat the closed oven for approx. 30 minutes at

240°C.

Use the heating function [Upper/lower

heat].

- Place

cookware with water on each

zone. Allow the

appliance

and afterwards at low

est setting each for about

10 minutes.

Arrange the mains cable in such a way that it

does not get in contact with any hot components

of the appliance. Do not lead it over sharp edges

Permissible connection methods

Permissible connection methodsPermissible connection methods

Permissible connection methods

Each connection requires the protective ground of the

mains to be connected to the E

terminal.

Recommendation is the connection

Recommendation is the connectionRecommendation is the connection

Recommendation is the connection

option to a three

option to a threeoption to a three

option to a three-

415V 3N~

380-415V 2N~

50/60Hz

F 5G

H05 VV-F 4G

1.5mm²

hob as well as the

oven interior with all

therein located accessories. Follow the instru

tions that we give you in the chapter "Cleaning

In order to burn any manufacturing residue

Heat the closed oven for approx. 30 minutes at

Use the heating function [Upper/lower

cookware with water on each

cooking

appliance

working at the highest

est setting each for about

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann EH 561 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bomann EH 561

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info