Bedienungsanleitung Bomann GSE 335 (Seite 17 von 28) (Deutsch, Englisch)

652038

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Transport and

Transport and Transport and

Transport and Unpacking the Appliance

Unpacking the ApplianceUnpacking the Appliance

Unpacking the Appliance

Transport the appliance

Transport the applianceTransport the appliance

Transport the appliance

Transport the appliance, if possible, only in vertical

position. Otherwise, it is absolutely necessary to

allow the appliance standing upright for a few hours

before installation ”Prior to first use”. Protect the ap-

pliance during transport against weather influences.

Unpack the appliance

Unpack the appliance Unpack the appliance

Unpack the appliance

• Remove the appliance from its packaging.

• Remove all packaging material, such as foils, filler

and cardboard packaging.

• To prevent hazards, check the appliance for any

transport damage.

• In case of damage, do not put the appliance into

operation. Contact your distributor.

NOTE

NOTENOTE

NOTE:

Production residue or dust may have collected on the

appliance. We recommend cleaning the appliance

according to chapter “Cleaning and Maintenance”.

Appliance Overview

Appliance OverviewAppliance Overview

Appliance Overview

1 Temperature control

2 Freezing drawers

3 adjustable feet

Delivery scope

Delivery scopeDelivery scope

Delivery scope

4 x freezing drawer, 1 x ice-cube tray, 1 x ice-

scraper, built-in material

Installation

InstallationInstallation

Installation

Condition

ConditionCondition

Conditions for the installation location

s for the installation locations for the installation location

s for the installation location

• Good ventilation is required around the appliance,

in order to dissipate the heat properly and to

guarantee efficient cooling operation at low power

consumption. Sufficient clearance is necessary.

- Refer to the instructions which we give you in

“Built-in”;

- Clearance to the front must be created so that

the appliance door can open without being im-

peded.

• Only install at a location with an ambient tempera-

ture suitable for the climate class of the appliance.

For information on the climate class, please refer

to chapter “Technical Data” or to the rating label

located in the interior or on the rear side of the

appliance.

• Look for stable, horizontal appliance position.

If the appliance is not horizontally leveled, adjust

the feet accordingly.

• Avoid the installation:

Avoid the installation:Avoid the installation:

Avoid the installation:

- near heaters, next to a stove, direct sunlight or

any other heat sources;

- at locations with high humidity (e.g. outdoors,

bathroom), as metal parts would be suscepti-

ble to corrosion under such circumstances;

- near volatile or flammable materials (e.g. gas,

fuel, alcohol, paint, etc.) and in rooms which

may have poor air circulation (e.g. garages).

- Do not expose the appliance any weather.

Electrical connection

Electrical connectionElectrical connection

Electrical connection

WARNING:

WARNING:WARNING:

WARNING:

• The installation to the mains supply must conform

to the local standards and regulations.

• Improper connection may cause to an electric

electric electric

electric

shock

shockshock

shock!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann GSE 335 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info