Bedienungsanleitung Bomann GSE 335 (Seite 19 von 28) (Deutsch, Englisch)

652038

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

2. Install the power cord so that the

appliance can be easily connected

after installation. Slide the appliance

into the built-in opening until the stop plate (A) abuts

the furniture.

3. The sides of the mount-

ing guide must rest flush

at the built-in furniture.

A distance of 5 mm must be located on the side

without mounting guide between appliance and built-

in furniture. Arrange the appliance for a vertical posi-

tion by the adjustable feet (a). To fix the unit, screw

in the supplied screws through the foot brackets.

4. Attach the supplied ventilation

grid between the feet.

5. Press the rubber seal between the

appliance and built-in furniture firmly

(on the side without hinge).

6. Separate the parts B, C and D of

part A.

7. In consideration of the shown dis-

tances, hold the guide (A) at the top

and bottom inside of the furniture door;

mark the positions of the drill holes. After drilling, fix

the guide with the screws provided.

8. Insert the cover (C) until it clicks in

the guide (A).

9. Fully open the appliance and furni-

ture door and join them together. Slide

the bracket (B) in the guide (A) and

mark the drill holes. Remove the bracket and drill

holes with about Ø 2 to 4.5 mm from the outer door

edge. Put the bracket on again; secure it with the

screws provided.

10. If an aligning of the furniture door is

necessary, use the slot spacing. Check if

the door is arranged vertical as well

as horizontal, so that a smooth opening and closing

of the door is ensured.

11. Insert the cover (D) until it clicks on

the angle (B).

Startup / Operation

Startup / OperationStartup / Operation

Startup / Operation

Prior to first use

Prior to first usePrior to first use

Prior to first use

CAUTION

CAUTIONCAUTION

CAUTION:

After transport, the appliance should be left standing

upright for about 4 hours before connecting to the

power supply. Nonobservance could lead to malfunc-

tion of the cooling system and causes an appliance

breakdown.

Clean the appliance interior including all accessory

parts. Consider the instructions which we provide in

the chapter “Cleaning and Maintenance”.

Star

StarStar

Starting the appliance

ting the applianceting the appliance

ting the appliance

• Connect the appliance to the power supply.

• Operate the temperature control. See also the

following section "Settings".

Settings

SettingsSettings

Settings

NOTE

NOTENOTE

NOTE:

Due to external influences such as ambient tempera-

ture, frequency of door opening and appliance as-

sembly, the temperature can be affected.

Setting [ • ] means that the appliance is in the off

state. Turn the temperature control clockwise, start-

ing from this setting; the appliance will turn on auto-

matically.

The power levels [1 – 4] regulates the different val-

ues of the internal temperature.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann GSE 335 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info